Re: [PATCH 08/26] drm/i915: s/pipe_config/crtc_state/

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 03 May 2022, Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>
> Rename some of the 'pipe_config's to the more modern
> 'crtc_state'.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>

Reviewed-by: Jani Nikula <jani.nikula@xxxxxxxxx>

> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 62 ++++++++++----------
>  1 file changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 4615cf3564eb..ac476976dc0b 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -5013,10 +5013,10 @@ static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
>  
>  static int
>  compute_sink_pipe_bpp(const struct drm_connector_state *conn_state,
> -		      struct intel_crtc_state *pipe_config)
> +		      struct intel_crtc_state *crtc_state)
>  {
>  	struct drm_connector *connector = conn_state->connector;
> -	struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
> +	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
>  	const struct drm_display_info *info = &connector->display_info;
>  	int bpp;
>  
> @@ -5038,16 +5038,16 @@ compute_sink_pipe_bpp(const struct drm_connector_state *conn_state,
>  		return -EINVAL;
>  	}
>  
> -	if (bpp < pipe_config->pipe_bpp) {
> +	if (bpp < crtc_state->pipe_bpp) {
>  		drm_dbg_kms(&i915->drm,
>  			    "[CONNECTOR:%d:%s] Limiting display bpp to %d instead of "
>  			    "EDID bpp %d, requested bpp %d, max platform bpp %d\n",
>  			    connector->base.id, connector->name,
>  			    bpp, 3 * info->bpc,
>  			    3 * conn_state->max_requested_bpc,
> -			    pipe_config->pipe_bpp);
> +			    crtc_state->pipe_bpp);
>  
> -		pipe_config->pipe_bpp = bpp;
> +		crtc_state->pipe_bpp = bpp;
>  	}
>  
>  	return 0;
> @@ -5058,7 +5058,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state *state,
>  			  struct intel_crtc *crtc)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> -	struct intel_crtc_state *pipe_config =
> +	struct intel_crtc_state *crtc_state =
>  		intel_atomic_get_new_crtc_state(state, crtc);
>  	struct drm_connector *connector;
>  	struct drm_connector_state *connector_state;
> @@ -5072,7 +5072,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state *state,
>  	else
>  		bpp = 8*3;
>  
> -	pipe_config->pipe_bpp = bpp;
> +	crtc_state->pipe_bpp = bpp;
>  
>  	/* Clamp display bpp to connector max bpp */
>  	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> @@ -5081,7 +5081,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state *state,
>  		if (connector_state->crtc != &crtc->base)
>  			continue;
>  
> -		ret = compute_sink_pipe_bpp(connector_state, pipe_config);
> +		ret = compute_sink_pipe_bpp(connector_state, crtc_state);
>  		if (ret)
>  			return ret;
>  	}
> @@ -5638,7 +5638,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>  			  struct intel_crtc *crtc)
>  {
>  	struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> -	struct intel_crtc_state *pipe_config =
> +	struct intel_crtc_state *crtc_state =
>  		intel_atomic_get_new_crtc_state(state, crtc);
>  	struct drm_connector *connector;
>  	struct drm_connector_state *connector_state;
> @@ -5646,28 +5646,28 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>  	int base_bpp, ret, i;
>  	bool retry = true;
>  
> -	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
> +	crtc_state->cpu_transcoder = (enum transcoder) crtc->pipe;
>  
> -	pipe_config->framestart_delay = 1;
> +	crtc_state->framestart_delay = 1;
>  
>  	/*
>  	 * Sanitize sync polarity flags based on requested ones. If neither
>  	 * positive or negative polarity is requested, treat this as meaning
>  	 * negative polarity.
>  	 */
> -	if (!(pipe_config->hw.adjusted_mode.flags &
> +	if (!(crtc_state->hw.adjusted_mode.flags &
>  	      (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
> -		pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
> +		crtc_state->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
>  
> -	if (!(pipe_config->hw.adjusted_mode.flags &
> +	if (!(crtc_state->hw.adjusted_mode.flags &
>  	      (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
> -		pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
> +		crtc_state->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
>  
>  	ret = compute_baseline_pipe_bpp(state, crtc);
>  	if (ret)
>  		return ret;
>  
> -	base_bpp = pipe_config->pipe_bpp;
> +	base_bpp = crtc_state->pipe_bpp;
>  
>  	/*
>  	 * Determine the real pipe dimensions. Note that stereo modes can
> @@ -5677,9 +5677,9 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>  	 * computation to clearly distinguish it from the adjusted mode, which
>  	 * can be changed by the connectors in the below retry loop.
>  	 */
> -	drm_mode_get_hv_timing(&pipe_config->hw.mode,
> +	drm_mode_get_hv_timing(&crtc_state->hw.mode,
>  			       &pipe_src_w, &pipe_src_h);
> -	drm_rect_init(&pipe_config->pipe_src, 0, 0,
> +	drm_rect_init(&crtc_state->pipe_src, 0, 0,
>  		      pipe_src_w, pipe_src_h);
>  
>  	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
> @@ -5700,20 +5700,20 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>  		 * hooks so that the hooks can use this information safely.
>  		 */
>  		if (encoder->compute_output_type)
> -			pipe_config->output_types |=
> -				BIT(encoder->compute_output_type(encoder, pipe_config,
> +			crtc_state->output_types |=
> +				BIT(encoder->compute_output_type(encoder, crtc_state,
>  								 connector_state));
>  		else
> -			pipe_config->output_types |= BIT(encoder->type);
> +			crtc_state->output_types |= BIT(encoder->type);
>  	}
>  
>  encoder_retry:
>  	/* Ensure the port clock defaults are reset when retrying. */
> -	pipe_config->port_clock = 0;
> -	pipe_config->pixel_multiplier = 1;
> +	crtc_state->port_clock = 0;
> +	crtc_state->pixel_multiplier = 1;
>  
>  	/* Fill in default crtc timings, allow encoders to overwrite them. */
> -	drm_mode_set_crtcinfo(&pipe_config->hw.adjusted_mode,
> +	drm_mode_set_crtcinfo(&crtc_state->hw.adjusted_mode,
>  			      CRTC_STEREO_DOUBLE);
>  
>  	/* Pass our mode to the connectors and the CRTC to give them a chance to
> @@ -5727,7 +5727,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>  		if (connector_state->crtc != &crtc->base)
>  			continue;
>  
> -		ret = encoder->compute_config(encoder, pipe_config,
> +		ret = encoder->compute_config(encoder, crtc_state,
>  					      connector_state);
>  		if (ret == -EDEADLK)
>  			return ret;
> @@ -5739,9 +5739,9 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>  
>  	/* Set default port clock if not overwritten by the encoder. Needs to be
>  	 * done afterwards in case the encoder adjusts the mode. */
> -	if (!pipe_config->port_clock)
> -		pipe_config->port_clock = pipe_config->hw.adjusted_mode.crtc_clock
> -			* pipe_config->pixel_multiplier;
> +	if (!crtc_state->port_clock)
> +		crtc_state->port_clock = crtc_state->hw.adjusted_mode.crtc_clock
> +			* crtc_state->pixel_multiplier;
>  
>  	ret = intel_crtc_compute_config(state, crtc);
>  	if (ret == -EDEADLK)
> @@ -5764,11 +5764,11 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
>  	 * only enable it on 6bpc panels and when its not a compliance
>  	 * test requesting 6bpc video pattern.
>  	 */
> -	pipe_config->dither = (pipe_config->pipe_bpp == 6*3) &&
> -		!pipe_config->dither_force_disable;
> +	crtc_state->dither = (crtc_state->pipe_bpp == 6*3) &&
> +		!crtc_state->dither_force_disable;
>  	drm_dbg_kms(&i915->drm,
>  		    "hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
> -		    base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
> +		    base_bpp, crtc_state->pipe_bpp, crtc_state->dither);
>  
>  	return 0;
>  }

-- 
Jani Nikula, Intel Open Source Graphics Center




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux