From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> Rename some of the 'pipe_config's to the more modern 'crtc_state'. Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_display.c | 62 ++++++++++---------- 1 file changed, 31 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c index 4615cf3564eb..ac476976dc0b 100644 --- a/drivers/gpu/drm/i915/display/intel_display.c +++ b/drivers/gpu/drm/i915/display/intel_display.c @@ -5013,10 +5013,10 @@ static void intel_modeset_update_connector_atomic_state(struct drm_device *dev) static int compute_sink_pipe_bpp(const struct drm_connector_state *conn_state, - struct intel_crtc_state *pipe_config) + struct intel_crtc_state *crtc_state) { struct drm_connector *connector = conn_state->connector; - struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev); + struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); const struct drm_display_info *info = &connector->display_info; int bpp; @@ -5038,16 +5038,16 @@ compute_sink_pipe_bpp(const struct drm_connector_state *conn_state, return -EINVAL; } - if (bpp < pipe_config->pipe_bpp) { + if (bpp < crtc_state->pipe_bpp) { drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] Limiting display bpp to %d instead of " "EDID bpp %d, requested bpp %d, max platform bpp %d\n", connector->base.id, connector->name, bpp, 3 * info->bpc, 3 * conn_state->max_requested_bpc, - pipe_config->pipe_bpp); + crtc_state->pipe_bpp); - pipe_config->pipe_bpp = bpp; + crtc_state->pipe_bpp = bpp; } return 0; @@ -5058,7 +5058,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); - struct intel_crtc_state *pipe_config = + struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); struct drm_connector *connector; struct drm_connector_state *connector_state; @@ -5072,7 +5072,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state *state, else bpp = 8*3; - pipe_config->pipe_bpp = bpp; + crtc_state->pipe_bpp = bpp; /* Clamp display bpp to connector max bpp */ for_each_new_connector_in_state(&state->base, connector, connector_state, i) { @@ -5081,7 +5081,7 @@ compute_baseline_pipe_bpp(struct intel_atomic_state *state, if (connector_state->crtc != &crtc->base) continue; - ret = compute_sink_pipe_bpp(connector_state, pipe_config); + ret = compute_sink_pipe_bpp(connector_state, crtc_state); if (ret) return ret; } @@ -5638,7 +5638,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state, struct intel_crtc *crtc) { struct drm_i915_private *i915 = to_i915(crtc->base.dev); - struct intel_crtc_state *pipe_config = + struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); struct drm_connector *connector; struct drm_connector_state *connector_state; @@ -5646,28 +5646,28 @@ intel_modeset_pipe_config(struct intel_atomic_state *state, int base_bpp, ret, i; bool retry = true; - pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe; + crtc_state->cpu_transcoder = (enum transcoder) crtc->pipe; - pipe_config->framestart_delay = 1; + crtc_state->framestart_delay = 1; /* * Sanitize sync polarity flags based on requested ones. If neither * positive or negative polarity is requested, treat this as meaning * negative polarity. */ - if (!(pipe_config->hw.adjusted_mode.flags & + if (!(crtc_state->hw.adjusted_mode.flags & (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC))) - pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC; + crtc_state->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC; - if (!(pipe_config->hw.adjusted_mode.flags & + if (!(crtc_state->hw.adjusted_mode.flags & (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC))) - pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC; + crtc_state->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC; ret = compute_baseline_pipe_bpp(state, crtc); if (ret) return ret; - base_bpp = pipe_config->pipe_bpp; + base_bpp = crtc_state->pipe_bpp; /* * Determine the real pipe dimensions. Note that stereo modes can @@ -5677,9 +5677,9 @@ intel_modeset_pipe_config(struct intel_atomic_state *state, * computation to clearly distinguish it from the adjusted mode, which * can be changed by the connectors in the below retry loop. */ - drm_mode_get_hv_timing(&pipe_config->hw.mode, + drm_mode_get_hv_timing(&crtc_state->hw.mode, &pipe_src_w, &pipe_src_h); - drm_rect_init(&pipe_config->pipe_src, 0, 0, + drm_rect_init(&crtc_state->pipe_src, 0, 0, pipe_src_w, pipe_src_h); for_each_new_connector_in_state(&state->base, connector, connector_state, i) { @@ -5700,20 +5700,20 @@ intel_modeset_pipe_config(struct intel_atomic_state *state, * hooks so that the hooks can use this information safely. */ if (encoder->compute_output_type) - pipe_config->output_types |= - BIT(encoder->compute_output_type(encoder, pipe_config, + crtc_state->output_types |= + BIT(encoder->compute_output_type(encoder, crtc_state, connector_state)); else - pipe_config->output_types |= BIT(encoder->type); + crtc_state->output_types |= BIT(encoder->type); } encoder_retry: /* Ensure the port clock defaults are reset when retrying. */ - pipe_config->port_clock = 0; - pipe_config->pixel_multiplier = 1; + crtc_state->port_clock = 0; + crtc_state->pixel_multiplier = 1; /* Fill in default crtc timings, allow encoders to overwrite them. */ - drm_mode_set_crtcinfo(&pipe_config->hw.adjusted_mode, + drm_mode_set_crtcinfo(&crtc_state->hw.adjusted_mode, CRTC_STEREO_DOUBLE); /* Pass our mode to the connectors and the CRTC to give them a chance to @@ -5727,7 +5727,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state, if (connector_state->crtc != &crtc->base) continue; - ret = encoder->compute_config(encoder, pipe_config, + ret = encoder->compute_config(encoder, crtc_state, connector_state); if (ret == -EDEADLK) return ret; @@ -5739,9 +5739,9 @@ intel_modeset_pipe_config(struct intel_atomic_state *state, /* Set default port clock if not overwritten by the encoder. Needs to be * done afterwards in case the encoder adjusts the mode. */ - if (!pipe_config->port_clock) - pipe_config->port_clock = pipe_config->hw.adjusted_mode.crtc_clock - * pipe_config->pixel_multiplier; + if (!crtc_state->port_clock) + crtc_state->port_clock = crtc_state->hw.adjusted_mode.crtc_clock + * crtc_state->pixel_multiplier; ret = intel_crtc_compute_config(state, crtc); if (ret == -EDEADLK) @@ -5764,11 +5764,11 @@ intel_modeset_pipe_config(struct intel_atomic_state *state, * only enable it on 6bpc panels and when its not a compliance * test requesting 6bpc video pattern. */ - pipe_config->dither = (pipe_config->pipe_bpp == 6*3) && - !pipe_config->dither_force_disable; + crtc_state->dither = (crtc_state->pipe_bpp == 6*3) && + !crtc_state->dither_force_disable; drm_dbg_kms(&i915->drm, "hw max bpp: %i, pipe bpp: %i, dithering: %i\n", - base_bpp, pipe_config->pipe_bpp, pipe_config->dither); + base_bpp, crtc_state->pipe_bpp, crtc_state->dither); return 0; } -- 2.35.1