Re: [PATCH v2] drm/i915/dsi: transmit brightness command in HS state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks, Jani.  That does not restore the mode flags perfectly.  I will revise the patch.

Regards
William

-----Original Message-----
From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx> 
Sent: Tuesday, November 9, 2021 6:41 PM
To: Tseng, William <william.tseng@xxxxxxxxx>; intel-gfx@xxxxxxxxxxxxxxxxxxxxx
Cc: Tseng, William <william.tseng@xxxxxxxxx>; Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>; Kulkarni, Vandita <vandita.kulkarni@xxxxxxxxx>; Lee, Shawn C <shawn.c.lee@xxxxxxxxx>; Chiou, Cooper <cooper.chiou@xxxxxxxxx>
Subject: Re: [PATCH v2] drm/i915/dsi: transmit brightness command in HS state

On Tue, 09 Nov 2021, William Tseng <william.tseng@xxxxxxxxx> wrote:
> In Video Mode, if DSI transcoder is set to transmit packets in LP 
> Escape mode, screen flickering would be obseved when brightness 
> commands are continuously and quickly transmitted to a panel.
>
> The problem may be resolved by changing the mode to transmit packets 
> from Low Power to HS.
>
> Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
> Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
> Cc: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
> Cc: Cooper Chiou <cooper.chiou@xxxxxxxxx>
> Signed-off-by: William Tseng <william.tseng@xxxxxxxxx>
> ---
>  drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c 
> b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> index f61ed82e8867..2f788cb0f597 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
> @@ -81,8 +81,10 @@ static void dcs_set_backlight(const struct 
> drm_connector_state *conn_state, u32
>  
>  	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
>  		dsi_device = intel_dsi->dsi_hosts[port]->device;
> +		dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
>  		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
>  				   &data, len);
> +		dsi_device->mode_flags |= MIPI_DSI_MODE_LPM;

Ah, but this doesn't *restore* the flags, it forces MIPI_DSI_MODE_LPM!

BR,
Jani.

>  	}
>  }

--
Jani Nikula, Intel Open Source Graphics Center




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux