[PATCH v2] drm/i915/dsi: transmit brightness command in HS state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In Video Mode, if DSI transcoder is set to transmit packets
in LP Escape mode, screen flickering would be obseved when
brightness commands are continuously and quickly transmitted
to a panel.

The problem may be resolved by changing the mode to transmit
packets from Low Power to HS.

Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
Cc: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
Cc: Cooper Chiou <cooper.chiou@xxxxxxxxx>
Signed-off-by: William Tseng <william.tseng@xxxxxxxxx>
---
 drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
index f61ed82e8867..2f788cb0f597 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
@@ -81,8 +81,10 @@ static void dcs_set_backlight(const struct drm_connector_state *conn_state, u32
 
 	for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
 		dsi_device = intel_dsi->dsi_hosts[port]->device;
+		dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
 		mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
 				   &data, len);
+		dsi_device->mode_flags |= MIPI_DSI_MODE_LPM;
 	}
 }
 
-- 
2.17.1




[Index of Archives]     [AMD Graphics]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux