In Video Mode, if DSI transcoder is set to transmit packets
in LP Escape mode, screen flickering would be obseved when
brightness commands are continuously and quickly transmitted
to a panel.
The problem may be resolved by changing the mode to transmit
packets from Low Power to HS.
Cc: Ville Syrjala <ville.syrjala@xxxxxxxxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
Cc: Vandita Kulkarni <vandita.kulkarni@xxxxxxxxx>
Cc: Lee Shawn C <shawn.c.lee@xxxxxxxxx>
Cc: Cooper Chiou <cooper.chiou@xxxxxxxxx>
Signed-off-by: William Tseng <william.tseng@xxxxxxxxx>
---
drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
index f61ed82e8867..a71ef1eb598c 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi_dcs_backlight.c
@@ -81,6 +81,7 @@ static void dcs_set_backlight(const struct drm_connector_state *conn_state, u32
for_each_dsi_port(port, intel_dsi->dcs_backlight_ports) {
dsi_device = intel_dsi->dsi_hosts[port]->device;
+ dsi_device->mode_flags &= ~MIPI_DSI_MODE_LPM;
mipi_dsi_dcs_write(dsi_device, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
&data, len);
}
--
2.17.1
