On 14/01/2020 11:06, Chris Wilson wrote:
Quoting Chris Wilson (2020-01-14 10:56:47)
The rc6 residency starts ticking from 0 from BIOS POST, but the kernel
starts measuring the time from its boot. If we start measuruing
I915_PMU_RC6_RESIDENCY while the GT is idle, we start our sampling from
0 and then upon first activity (park/unpark) add in all the rc6
residency since boot. After the first park with the sampler engaged, the
sleep/active counters are aligned.
v2: With a wakeref to be sure
Fixes: df6a42053513 ("drm/i915/pmu: Ensure monotonic rc6")
Signed-off-by: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Cc: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxx>
---
drivers/gpu/drm/i915/i915_pmu.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/i915/i915_pmu.c b/drivers/gpu/drm/i915/i915_pmu.c
index 28a82c849bac..ec0299490dd4 100644
--- a/drivers/gpu/drm/i915/i915_pmu.c
+++ b/drivers/gpu/drm/i915/i915_pmu.c
@@ -637,8 +637,10 @@ static void i915_pmu_enable(struct perf_event *event)
container_of(event->pmu, typeof(*i915), pmu.base);
unsigned int bit = event_enabled_bit(event);
struct i915_pmu *pmu = &i915->pmu;
+ intel_wakeref_t wakeref;
unsigned long flags;
+ wakeref = intel_runtime_pm_get(&i915->runtime_pm);
I think it would be nicer to use with_intel_runtime_pm directly at the
__get_rc6 call site. That would show/localise where it is actually needed.
spin_lock_irqsave(&pmu->lock, flags);
/*
@@ -648,6 +650,14 @@ static void i915_pmu_enable(struct perf_event *event)
BUILD_BUG_ON(ARRAY_SIZE(pmu->enable_count) != I915_PMU_MASK_BITS);
GEM_BUG_ON(bit >= ARRAY_SIZE(pmu->enable_count));
GEM_BUG_ON(pmu->enable_count[bit] == ~0);
+
+ if (pmu->enable_count[bit] == 0 &&
+ config_enabled_mask(I915_PMU_RC6_RESIDENCY) & BIT_ULL(bit)) {
+ pmu->sample[__I915_SAMPLE_RC6_LAST_REPORTED].cur = 0;
I can't decide if it's better to have discrete sampling appear
monotonic, or to reset just in case we drifted far off.
What do you mean?
This looks correct to me as you implemented it. On enable it samples the
real RC6 and updates pmu->sleep_last. So regardless if the next even
read comes with device awake or suspended it will report monotonic and
without adding up any time outside the enabled window.
Drift can normally come when we overestimate because hw RC6 can be less
than our time between park and unpark. I don't see how to reset that and
stay monotonic. Or you are thinking it doesn't need to be monotonic?
Regards,
Tvrtko
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
