From: Kai Chen <kai.chen@xxxxxxxxx>
On GEN9LP, raise the RPS FUp Interrupt Limiter above softmax so that the
HW won't miss interrupt when requested max_freq is set back to RP0
value.
Signed-off-by: Kai Chen <kai.chen@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_pm.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index d99e5fabe93c..bf2494294c9d 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -6276,7 +6276,20 @@ static u32 intel_rps_limits(struct drm_i915_private *dev_priv, u8 val)
* frequency, if the down threshold expires in that window we will not
* receive a down interrupt. */
if (INTEL_GEN(dev_priv) >= 9) {
- limits = (rps->max_freq_softlimit) << 23;
+ int max_freq = rps->max_freq_softlimit;
+ int rp0_freq = rps->rp0_freq;
+
+ if (IS_GEN9_LP(dev_priv) && (max_freq == rp0_freq))
+ /*
+ * For GEN9_LP, it is suggested to increase the upper
+ * interrupt limiter by 1 (16.6MHz) so that the HW will
+ * generate an interrupt when we are near or just below
+ * the upper limit.
+ */
+ limits = (rps->max_freq_softlimit + 1) << 23;
+ else
+ limits = (rps->max_freq_softlimit) << 23;
+
if (val <= rps->min_freq_softlimit)
limits |= (rps->min_freq_softlimit) << 14;
} else {
--
2.17.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
