Hello Ben, Thank you for your answer. Looking for the ath10k-ct, I noticed that there are 2 versions available (community and non-commercial). Will I be able to setup H2.0 with the community version? Best Regards, François François Vergès, CWNE#180 Wireless Network Engineer & Owner SemFio Networks Inc. Tel: +1 514 475-5305 Email: fverges@xxxxxxxxxxxxxxxxxx Website: www.semfionetworks.com Want to learn more about how Wi-Fi 6 works? - Listen here: https://www.cleartosend.net/ax On Mon, Jan 20, 2020 at 6:29 PM Ben Greear <greearb@xxxxxxxxxxxxxxx> wrote: > > Hello, > > Ath9k pcie cards should work, and we have had success with ath10k-ct > drivers/firmware before. > > Thanks, > Ben > > On 1/20/20 2:28 PM, François Vergès wrote: > > Thank you for your answer Jouni. > > > > Do you know any combination of driver/chipset I could use to make > > Hotspot 2.0 Rel 2 work? > > > > > > François Vergès, CWNE#180 > > Wireless Network Engineer & Owner > > SemFio Networks Inc. > > Tel: +1 514 475-5305 > > Email: fverges@xxxxxxxxxxxxxxxxxx > > Website: www.semfionetworks.com > > > > > > > > Want to learn more about how Wi-Fi 6 works? - Listen here: > > https://www.cleartosend.net/ax > > > > > > On Mon, Jan 20, 2020 at 5:00 PM Jouni Malinen <j@xxxxx> wrote: > >> > >> On Mon, Jan 20, 2020 at 03:28:03PM -0500, François Vergès wrote: > >>> I have tried to add the "ieee802.11w=1" to the configurations but > >>> hostapd doesn't start when I do so. > >>> > >>> Here is what the logs is telling me: "nl80211: set_key failed; err=-22 > >>> Invalid argument)". > >> > >>> wpa_driver_nl80211_set_key: ifindex=4 (wlx000e8e9082a7) alg=4 > >>> addr=0x561270d06058 key_idx=4 set_tx=1 seq_len=0 key_len=16 > >>> nl80211: KEY_DATA - hexdump(len=16): [REMOVED] > >>> broadcast key > >>> nl80211: set_key failed; err=-22 Invalid argument) > >> > >> This alg=4 (WPA_ALG_IGTK), key_idx=4 is the key used by PMF for > >> protecting group addressed robust management frames. It looks like the > >> driver used here does not support BIP and as such, it cannot be used > >> with PMF. Consequently, it is not suitable for use with Hotspot 2.0 Rel > >> 2. > >> > >> -- > >> Jouni Malinen PGP id EFC895FA > > > > _______________________________________________ > > Hostap mailing list > > Hostap@xxxxxxxxxxxxxxxxxxx > > http://lists.infradead.org/mailman/listinfo/hostap > > > > > -- > Ben Greear <greearb@xxxxxxxxxxxxxxx> > Candela Technologies Inc http://www.candelatech.com > _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
