Thanks for your prompt reply mike.
I really had good start of learning more about GNUGK. Now GK seems to be working but when i was trying to register the pacphone with gatekeeper,it says "GK security denial" and im unable to understand where to add the ID's for login or register endpoint softphones and where to define the route pattern.
Do GNUGK has built with codec G723 and G729 or do i specially need to purchase them.
Pls kindly check once below INI file pls suggest me changes and i want to up the ACD also running as my requirement is for call centre.where do i need to add it.
Below is my .INI file
[Gatekeeper::Main]
FortyTwo=42
Name=GnuGk
EndpointSuffix=_gnugk
TimeToLive=60
StatusTraceLevel=1
UseBroadcastListener=0
UseMulticastListener=0
Multicastport=1718
MulticastGroup=224.0.1.41
FortyTwo=42
Name=GnuGk
EndpointSuffix=_gnugk
TimeToLive=60
StatusTraceLevel=1
UseBroadcastListener=0
UseMulticastListener=0
Multicastport=1718
MulticastGroup=224.0.1.41
[GkStatus::Auth]
rule=allow
127.0.0.1=allow
default=forbid
Shutdown=allow
rule=allow
127.0.0.1=allow
default=forbid
Shutdown=allow
[Gatekeeper::Auth]
SimplePasswordAuth=required;RRQ
SimplePasswordAuth=required;RRQ
[SimplePasswordAuth]
vinod=vinod arun=arun dcdadmin=@dm1ntel
vinod=vinod arun=arun dcdadmin=@dm1ntel
[RoutedMode]
GKRouted=1
H245Routed=0
CallSignalPort=1721
AcceptNeighborCalls=1
AcceptUnregisteredCalls=0
RemoveH245AddressOnTunneling=1
RemoveCallOnDRQ=0
DropCallsByReleaseComplete=1
SendReleaseCompleteOnDRQ=0
SupportNATedEndpoints=1
TranslateFacility=1
[Proxy]
Enable=0
ProxyForNAT=1
ProxyForSameNAT=0
[RasSrv::RRQFeatures]
AcceptEndpointIdentifier=0
AcceptGatewayPrefixes=1
AcceptEndpointIdentifier=0
AcceptGatewayPrefixes=1
[RasSrv::ARQFeatures]
CallUnregisteredEndpoints=1
CallUnregisteredEndpoints=1
[CallTable]
GenerateNBCDR=0
GenerateUCCDR=1
GenerateNBCDR=0
GenerateUCCDR=1
[root@pbx ~]# /usr/sbin/gnugk-2.2.6-linux-x86/bin/gnugk -c /usr/sbin/gnugk-2.2.6-linux-x86/contrib/WinInstaller/Install/gatekeeper.ini -r
OpenH323 Gatekeeper - The GNU Gatekeeper with ID 'GnuGk' started
Gatekeeper(GNU) Version(2.2.6) Ext(pthreads=1,radius=1,mysql=1,pgsql=1,firebird=0,large_fdset=0,crypto/ssl=1) Build(May 1 2007, 15:22:23) Sys(Linux i686 2.6.9-5.ELsmp)
OpenH323 Gatekeeper - The GNU Gatekeeper with ID 'GnuGk' started
Gatekeeper(GNU) Version(2.2.6) Ext(pthreads=1,radius=1,mysql=1,pgsql=1,firebird=0,large_fdset=0,crypto/ssl=1) Build(May 1 2007, 15:22:23) Sys(Linux i686 2.6.9-5.ELsmp)
Listen on 10.50.5.150,127.0.0.1
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.
Disable Bandwidth Management
Thanks And Regards
Mike Ockenga <Mike.Ockenga@xxxxxxxxx> wrote:
> -----Original Message-----
> From: openh323gk-users-bounces@xxxxxxxxxxxxxxxxxxxxx
> [mailto:openh323gk-users-bounces@xxxxxxxxxxxxxxxxxxxxx] On
> Behalf Of vinod
> Sent: Wednesday, August 08, 2007 3:17 PM
> To: openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
> Subject: request for help -GNUGK
>
> Im trying to build it last time but failed becoz finally when
> i was starting it was prompting the error root@pbx bin]#
> /opt/gnugk-2.2.6-linux-x86/bin/gnugk -c
> 2007/08/07 23:34:08.075 0 Toolkit.cxx(895)
> CONFIG Could not create/link config to a temporary file
> /tmp/gnugk.ini-7409
> WARNING: No config file found!
>
That's not the output of a build command. It appears that you were
actually running the fully compiled ./gnugk executable, but simply
failed to give it a path to a valid config (.ini) file.
> Again i had deleted every thing and started building all and
> till now i see no error upto openh323 compilation.
>
Based on the output above, this seems like an unnecessary step.
> I would also like to know do i need purchase any license for
> using G723 AND G729 codec
>
> Will pacphone support my requirement for call centre working
> with GNUGK
>
> Can GNUGK terminate SIP traffic also from orginator or any
> SIP to H323 translator required.
>
GnuGK is an H.323 device and doesn't support SIP.
Regards,
Mike
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
Moody friends. Drama queens. Your life? Nope! - their life, your story.
Play Sims Stories at Yahoo! Games.
------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
