Hi, do you see problems with the counters after changing the prefix capacities and reloading or also if you reload the unchanged config ? Since it worked in my tests, could you please provide an example config that shows the problem ? (as simple as possible while still showing the error) Thanks, Jan Gabriel Georgescu wrote: > Hi Jan, > > I checked without reload and indeed the counters are decreased. But I > do not think this is all you wanted. Otherwise the very good 'reload' > command became useless. > I understand that the counters may be lower than what they should, > but the problem is that they do not -decrease- anymore after a reload. > So I think this sounds like a bug comparing with the intended behaviour. > > Anyway thank you for the great job and for the support! > Gabriel > > At 05:25 PM 6/13/2007, Jan Willamowius wrote: > >Hi Gabriel, > > > >PrefixCapacities are a bit particular in regards to reload, but in a > >different way than you describe: > >When you reload your config, the stats counters get reset to zero and > >the new prefix limits are read in. If you have ongoing calls while you > >do the reload your stats counter will be _lower_ than they should (and > >calls may fail on the overloaded gateway). At least that is the > >intended behaviour since migrating the call stats to a new set of > >capacity settings is a very hard job. > > > >So, please re-test without reloading to see if your counters get > >properly decremented. They were in my tests, but of course I might have > >overlooked something. If somebody wants to tackle the stats migration > >between different capacity setting, feel free to send me a patch. ;-) > > > >Regards, > >Jan > > > > > >Gabriel Georgescu wrote: > > > Hi, > > > > > > I think there may be a problem with the new feature 'PrefixCapacities'. > > > It works well until the maximum call limit is reached. But then it > > > will reject all further calls even if there is room for them. > > > It looks like the counter remains at the maximum value and is never > > > decreased beginning with that point. > > > I'm not sure if this happens always or only after a config reload. I > > > tested only after config reload. > > > > > > All the best, > > > Gabriel > > > >-- > >Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ > > > >------------------------------------------------------------------------- > >This SF.net email is sponsored by DB2 Express > >Download DB2 Express C - the FREE version of DB2 express and take > >control of your XML. No limits. Just data. Click to get it now. > >http://sourceforge.net/powerbar/db2/ > >_______________________________________________________ > > > >Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > >Archive: > >http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > >Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > >Homepage: http://www.gnugk.org/ > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________________ > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > Homepage: http://www.gnugk.org/ > -- Jan Willamowius, jan@xxxxxxxxxxxxxx, http://www.gnugk.org/ ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_name=openh323gk-users Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
