I put my VIP400 to work... To the VIP400 work with gnugk u MUST leave the " h323 aliases (E.164)" parameter empty. So... problem solved! :D Tito Garrido Ogando, Brazil On 10/17/06, Tito Garrido <titogarrido@xxxxxxxxx> wrote: > sure... but i cant put the vip-400fo to work on gnugk... > the gnugk couldnt decode the RAS msg. > > 2006/10/13 10:52:58.566 1 RasSrv.cxx(177) RAS Could not decode message from 192.168.0.156:1024 > > so i changed my gateway... i'm using a phoneway now and its working fine. > I dunno the solution for the VIP400FO yet :( > > > > On 10/17/06, Chan Jason <jason.polaris@xxxxxxxxx> wrote: > > Dear Tito, > > Can you tell us more about your finding and let other's to know > > what's going on when they have the same problem? I think there is mail > > archive and others can search thru that. Thanks. > > > > Yours sincerely, > > Jason Chan, Hong Kong > > > > On 10/16/06, Tito Garrido <titogarrido@xxxxxxxxx> wrote: > > > The problem is the Planet... my phoneway is working well :) > > > > > > Thanks! > > > > > > > > > On 10/16/06, Simon Horne <s.horne@xxxxxxxxxxxxxx > wrote: > > > > > > > > There perhaps is something wrong with message coming from the gw device. > > > > I had this problem when porting OpenH323 to H.323v6 and the additional > > > > mandatory fields in H.323v6, for some reason caused problems on some linux > > > > versions of GnuGk. > > > > > > > > My suggestion > > > > 1. See if ethereal will decode the messages coming from the gw. > > > > 2. See if the windows version of GnuGk will decode the message. > > > > > > > > If neither work then you will need to get a trace log out of the GW and > > > > post it so we can see which fields are causing the problem in the decode. > > > > > > > > Simon > > > > > > > > > > > > At 05:05 PM 16/10/2006, you wrote: > > > > >This means the gatekeeper receives an invalid H.323 message. > > > > >Maybe there is a bug in the gw firmware or there is a NAT router > > > > >between the gw and the gk, that messes up with H.323 messages. > > > > >Make also sure you're using some recent gk/pwlib/openh323 versions. > > > > > > > > > >----- Original Message ----- > > > > >From: "Tito Garrido" <titogarrido@xxxxxxxxx > > > > > >Sent: Sunday, October 15, 2006 4:42 AM > > > > > > > > > > > > > > >I found this erro message in my gnugk log when i reboot the VIP: > > > > >2006/10/13 10:52:58.566 4 RasSrv.cxx(212) RAS Receiving > > > on > > > > >192.168.0.160:1719(U) > > > > >2006/10/13 10:52:58.566 2 RasSrv.cxx(174) RAS Read from > > > > >192.168.0.156:1024 > > > > >2006/10/13 10:52: 58.566 1 RasSrv.cxx(177) RAS Could not > > > > >decode message from 192.168.0.156:1024 > > > > > > > > > >U know what i can do? > > > > > > > > > >On 10/13/06, Tito Garrido < titogarrido@xxxxxxxxx> wrote: > > > > > > > > > > > > My h323 configuration on VIP: > > > > > > > > > > > > - h323 display_name = planet_gw > > > > > > - h323 h245_term_type = 60 > > > > > > - h323 rtp_port_base = 30000 > > > > > > - h323 out_fast_start = on > > > > > > - h323 in_fast_start = on > > > > > > - h323 h245_tunneling = off > > > > > > - h323 cisco_t38 = on > > > > > > - h323 callSignalPort = 1720 > > > > > > - h323 nat_call = on > > > > > > - h323 call_name = > > > > > > - h323 local_alert = off > > > > > > - h323 default_dtmf = H323 V2 Signal > > > > > > - No Alternate IP Defined! > > > > > > - h323 dns_ip = 0 > > > > > > - h323 gk_mode = manual > > > > > > - h323 gk_addr = 192.168.0.160 Port: 1719 > > > > > > - h323 allow_calls_wo_gk = false > > > > > > - h323 endpoint_reg_type = gw > > > > > > - h323 time_to_live = 0 > > > > > > - h323 h245_timeout = 30000 > > > > > > - h323 endpoint_prefix = > > > > > > - h323 term_id = > > > > > > - h323 gk_id = > > > > > > - h323 aliases (E.164) = > > > > > > - planet_gw > > > > > > - h323 alt_gk = 0.0.0.0 Port: 1719 > > > > > > - h323 gk_name = > > > > > > - h323 alt_gk_name = > > > > > > - h323 wan_refresh = 120 > > > > > > - h323 nat_name = > > > > > > - h323 wan_mode = off > > > > > > - h323 wan_port_gk = 0 > > > > > > - h323 wan_port_gw = 0 > > > > > > - h323 wan_max_retries = 10 > > > > > > - h323 wan_lost_timer = 1 > > > > > > > > > > > > My gnugk.ini > > > > > > > > > > > > [Gatekeeper::Main] > > > > > > Fourtytwo=42 > > > > > > Name=OkscmGK > > > > > > StatusPort=7000 > > > > > > > > > > > > [RoutedMode] > > > > > > GKRouted=1 > > > > > > H245Routed=0 > > > > > > CallSignalPort=1721 > > > > > > CallSignalHandlerNumber=1 > > > > > > AcceptNeighborsCalls=1 > > > > > > AcceptUnregisteredCalls=0 > > > > > > SupportNATedEndpoints=1 > > > > > > DropCallsByReleaseComplete=1 > > > > > > > > > > > > [Proxy] > > > > > > Enable=1 > > > > > > RTPPortRange=50000-59999 > > > > > > InternalNetwork= 192.168.0.0/24 > > > > > > ProxyForNAT=1 > > > > > > > > > > > > [RasSrv::GWPrefixes] > > > > > > planet_gw=88 > > > > > > > > > > > > [RasSrv::RRQFeatures] > > > > > > > > > > > > [RasSrv::ARQFeatures] > > > > > > ArjReasonRouteCallToSCN=0 > > > > > > ArjReasonRouteCallToGatekeeper=1 > > > > > > CallUnregisteredEndpoints=1 > > > > > > RemoveTrailingChar=# > > > > > > RoundRobinGateways=1 > > > > > > > > > > > > [RoutingPolicy] > > > > > > default=explicit,internal,parent,neighbor > > > > > > > > > > > > [RasSrv::RRQAuth] > > > > > > ;default=confirm > > > > > > defalt=allow > > > > > > > > > > > > [GkStatus::Auth] > > > > > > rule=explicit | password > > > > > > 192.168.0.160=allow > > > > > > gkadmin=ClKGMjCtXr0= > > > > > > > > > > > > [RasSrv::RewriteE164] > > > > > > > > > > > > [RasSrv::LRQFeatures] > > > > > > > > > > > > [RasSrv::PermanentEndpoints] > > > > > > ;192.168.0.156=planet_gw;88 > > > > > > > > > > > > ;[EP::planet_gw] > > > > > > ;GatewayPriority=1 > > > > > > > > > > > > [Gatekeeper::Auth] > > > > > > default=allow > > > > > > > > > > > > [CallTable] > > > > > > > > > > > > [Gatekeeper::Acct] > > > > > > > > > > > > [NATedEndpoints] > > > > > > > > > > > > [CTI::Agents] > > > > > > VirtualQueueAliases=CC > > > > > > RequestTimeout=10 > > > > > > > > > > > > > > > > > > Thanks for your help! > > > > > > > > > > > > Tito Garrido, Brazil > > > > > > > > > > > > > > > > > > On 10/12/06, Tito Garrido < titogarrido@xxxxxxxxx > wrote: > > > > > > > > > > > > > > Hi Jason, > > > > > > > > > > > > > > My VIP-400FO and GNUGk are both in local lan, i'm testing how they > > > work. > > > > > > > First of all i didnt make my gateway get registered in my GK, i dont > > > > > > > know > > > > > > > wat is wrong, so i put the VIP as a permanent endpoind... so my VIP > > > > > > > wasnt > > > > > > > detected by the GK. I'll try this configuration that u mentioned " > > > leave > > > > > > > the > > > > > > > default gateway(i mean router here) to 0.0.0.0 (that is none)" this > > > > > > > setting i put on VIP? > > > > > > > > > > > > > > Tomorrow i'll post my h323 configuration of the VIP and my gnugk.ini > > > > > > > > > > > > > > Thanks for your answer! > > > > > > > Tito Garrido Ogando, Brazil > > > > > > > > > > > > > > On 10/12/06, Chan Jason < jason.polaris@xxxxxxxxx> wrote: > > > > > > > > > > > > > > > > Hi Tito, > > > > > > > > I didn't come across with VIP-400, but with VIP-450. I hope I > > > can > > > > > > > > give you some hints that is useful, but not I'm sure if I'm right > > > on > > > > > > > > VIP-400 series.. > > > > > > > > First of all, I assume that you have a VIP-400 that is inside > > > your > > > > > > > > local LAN, with a Linux box as a NAT router and GNUGK installed. > > > First > > > > > > > > of all, in order to make the gateway registered with your GK, > > > remember > > > > > > > > to leave the default gateway(i mean router here) to 0.0.0.0 (that > > > is > > > > > > > > none) and put your GK address. If you are really doing NAT, > > > remember > > > > > > > > to start the proxy in GNUGK, as you have to "bridge" the LAN and > > > > > > > > Internet, but not using anything provided by NAT or IPTABLES etc. > > > > > > > > Please tell me if you have any other problem (but please specify > > > > > > > > deeper...). > > > > > > > > > > > > > > > > Yours sincerely, > > > > > > > > Jason Chan, Hong Kong > > > > > > > > > > > > > > > > On 10/11/06, Tito Garrido < titogarrido@xxxxxxxxx > wrote: > > > > > > > > > Anybody have a tutorial or some experience? > > > > > > > > > I'm trying to use the VIP-400FO but no success :( > > > > > > > > > > > > > > > > > >------------------------------------------------------------------------- > > > > >Using Tomcat but need to do more? Need to support web services, security? > > > > >Get stuff done quickly with pre-integrated technology to make your job > > > easier > > > > >Download IBM WebSphere Application Server v.1.0.1 based on Apache > > > Geronimo > > > > > > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > > > > >_______________________________________________________ > > > > > > > > > >Posting: mailto: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > > > > >Archive: > > > http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > > > > >Unsubscribe: > > > http://lists.sourceforge.net/lists/listinfo/openh323gk-users > > > > >Homepage: http://www.gnugk.org/ > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------- > > > > Using Tomcat but need to do more? Need to support web services, security? > > > > Get stuff done quickly with pre-integrated technology to make your job > > > easier > > > > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > > > > > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > > > > _______________________________________________________ > > > > > > > > Posting: mailto: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > > > > Archive: > > > http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > > > > Unsubscribe: > > > http://lists.sourceforge.net/lists/listinfo/openh323gk-users > > > > Homepage: http://www.gnugk.org/ > > > > > > > > > > > > > > > > -- > > > > > > Linux User #387870 > > > ____ > > > _/_õ|__| > > > º[ .-.___.-._| . . . . > > > _(o).__(o).:_____ > > > ------------------------------------------------------------------------- > > > Using Tomcat but need to do more? Need to support web services, security? > > > Get stuff done quickly with pre-integrated technology to make your job > > > easier > > > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > > > > > > _______________________________________________________ > > > > > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > > > Archive: > > > http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > > > Unsubscribe: > > > http://lists.sourceforge.net/lists/listinfo/openh323gk-users > > > Homepage: http://www.gnugk.org/ > > > > > > > > > > ------------------------------------------------------------------------- > > Using Tomcat but need to do more? Need to support web services, security? > > Get stuff done quickly with pre-integrated technology to make your job easier > > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > > _______________________________________________________ > > > > Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > > Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users > > Homepage: http://www.gnugk.org/ > > > > > > -- > > Linux User #387870 > ____ > _/_õ|__| > º[ .-.___.-._| . . . . > _(o).__(o).:_____ -- Linux User #387870 ____ _/_õ|__| º[ .-.___.-._| . . . . _(o).__(o).:_____ ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
