Thanks!
On 10/16/06, Simon Horne <s.horne@xxxxxxxxxxxxxx
> wrote:
There perhaps is something wrong with message coming from the gw device.
I had this problem when porting OpenH323 to H.323v6 and the additional
mandatory fields in H.323v6, for some reason caused problems on some linux
versions of GnuGk.
My suggestion
1. See if ethereal will decode the messages coming from the gw.
2. See if the windows version of GnuGk will decode the message.
If neither work then you will need to get a trace log out of the GW and
post it so we can see which fields are causing the problem in the decode.
Simon
At 05:05 PM 16/10/2006, you wrote:
>This means the gatekeeper receives an invalid H.323 message.
>Maybe there is a bug in the gw firmware or there is a NAT router
>between the gw and the gk, that messes up with H.323 messages.
>Make also sure you're using some recent gk/pwlib/openh323 versions.
>
>----- Original Message -----
>From: "Tito Garrido" <titogarrido@xxxxxxxxx >
>Sent: Sunday, October 15, 2006 4:42 AM
>
>
>I found this erro message in my gnugk log when i reboot the VIP:
>2006/10/13 10:52:58.566 4 RasSrv.cxx(212) RAS Receiving on
>192.168.0.160:1719(U)
>2006/10/13 10:52:58.566 2 RasSrv.cxx(174) RAS Read from
>192.168.0.156:1024
>2006/10/13 10:52:58.566 1 RasSrv.cxx(177) RAS Could not
>decode message from 192.168.0.156:1024
>
>U know what i can do?
>
>On 10/13/06, Tito Garrido < titogarrido@xxxxxxxxx> wrote:
> >
> > My h323 configuration on VIP:
> >
> > - h323 display_name = planet_gw
> > - h323 h245_term_type = 60
> > - h323 rtp_port_base = 30000
> > - h323 out_fast_start = on
> > - h323 in_fast_start = on
> > - h323 h245_tunneling = off
> > - h323 cisco_t38 = on
> > - h323 callSignalPort = 1720
> > - h323 nat_call = on
> > - h323 call_name =
> > - h323 local_alert = off
> > - h323 default_dtmf = H323 V2 Signal
> > - No Alternate IP Defined!
> > - h323 dns_ip = 0
> > - h323 gk_mode = manual
> > - h323 gk_addr = 192.168.0.160 Port: 1719
> > - h323 allow_calls_wo_gk = false
> > - h323 endpoint_reg_type = gw
> > - h323 time_to_live = 0
> > - h323 h245_timeout = 30000
> > - h323 endpoint_prefix =
> > - h323 term_id =
> > - h323 gk_id =
> > - h323 aliases (E.164) =
> > - planet_gw
> > - h323 alt_gk = 0.0.0.0 Port: 1719
> > - h323 gk_name =
> > - h323 alt_gk_name =
> > - h323 wan_refresh = 120
> > - h323 nat_name =
> > - h323 wan_mode = off
> > - h323 wan_port_gk = 0
> > - h323 wan_port_gw = 0
> > - h323 wan_max_retries = 10
> > - h323 wan_lost_timer = 1
> >
> > My gnugk.ini
> >
> > [Gatekeeper::Main]
> > Fourtytwo=42
> > Name=OkscmGK
> > StatusPort=7000
> >
> > [RoutedMode]
> > GKRouted=1
> > H245Routed=0
> > CallSignalPort=1721
> > CallSignalHandlerNumber=1
> > AcceptNeighborsCalls=1
> > AcceptUnregisteredCalls=0
> > SupportNATedEndpoints=1
> > DropCallsByReleaseComplete=1
> >
> > [Proxy]
> > Enable=1
> > RTPPortRange=50000-59999
> > InternalNetwork= 192.168.0.0/24
> > ProxyForNAT=1
> >
> > [RasSrv::GWPrefixes]
> > planet_gw=88
> >
> > [RasSrv::RRQFeatures]
> >
> > [RasSrv::ARQFeatures]
> > ArjReasonRouteCallToSCN=0
> > ArjReasonRouteCallToGatekeeper=1
> > CallUnregisteredEndpoints=1
> > RemoveTrailingChar=#
> > RoundRobinGateways=1
> >
> > [RoutingPolicy]
> > default=explicit,internal,parent,neighbor
> >
> > [RasSrv::RRQAuth]
> > ;default=confirm
> > defalt=allow
> >
> > [GkStatus::Auth]
> > rule=explicit | password
> > 192.168.0.160=allow
> > gkadmin=ClKGMjCtXr0=
> >
> > [RasSrv::RewriteE164]
> >
> > [RasSrv::LRQFeatures]
> >
> > [RasSrv::PermanentEndpoints]
> > ;192.168.0.156=planet_gw;88
> >
> > ;[EP::planet_gw]
> > ;GatewayPriority=1
> >
> > [Gatekeeper::Auth]
> > default=allow
> >
> > [CallTable]
> >
> > [Gatekeeper::Acct]
> >
> > [NATedEndpoints]
> >
> > [CTI::Agents]
> > VirtualQueueAliases=CC
> > RequestTimeout=10
> >
> >
> > Thanks for your help!
> >
> > Tito Garrido, Brazil
> >
> >
> > On 10/12/06, Tito Garrido < titogarrido@xxxxxxxxx > wrote:
> > >
> > > Hi Jason,
> > >
> > > My VIP-400FO and GNUGk are both in local lan, i'm testing how they work.
> > > First of all i didnt make my gateway get registered in my GK, i dont
> > > know
> > > wat is wrong, so i put the VIP as a permanent endpoind... so my VIP
> > > wasnt
> > > detected by the GK. I'll try this configuration that u mentioned " leave
> > > the
> > > default gateway(i mean router here) to 0.0.0.0 (that is none)" this
> > > setting i put on VIP?
> > >
> > > Tomorrow i'll post my h323 configuration of the VIP and my gnugk.ini
> > >
> > > Thanks for your answer!
> > > Tito Garrido Ogando, Brazil
> > >
> > > On 10/12/06, Chan Jason < jason.polaris@xxxxxxxxx> wrote:
> > > >
> > > > Hi Tito,
> > > > I didn't come across with VIP-400, but with VIP-450. I hope I can
> > > > give you some hints that is useful, but not I'm sure if I'm right on
> > > > VIP-400 series..
> > > > First of all, I assume that you have a VIP-400 that is inside your
> > > > local LAN, with a Linux box as a NAT router and GNUGK installed. First
> > > > of all, in order to make the gateway registered with your GK, remember
> > > > to leave the default gateway(i mean router here) to 0.0.0.0 (that is
> > > > none) and put your GK address. If you are really doing NAT, remember
> > > > to start the proxy in GNUGK, as you have to "bridge" the LAN and
> > > > Internet, but not using anything provided by NAT or IPTABLES etc.
> > > > Please tell me if you have any other problem (but please specify
> > > > deeper...).
> > > >
> > > > Yours sincerely,
> > > > Jason Chan, Hong Kong
> > > >
> > > > On 10/11/06, Tito Garrido < titogarrido@xxxxxxxxx > wrote:
> > > > > Anybody have a tutorial or some experience?
> > > > > I'm trying to use the VIP-400FO but no success :(
>
>
>-------------------------------------------------------------------------
>Using Tomcat but need to do more? Need to support web services, security?
>Get stuff done quickly with pre-integrated technology to make your job easier
>Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
>http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
>_______________________________________________________
>
>Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
>Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
>Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
>Homepage: http://www.gnugk.org/
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
--
Linux User #387870
____
_/_õ|__|
º[ .-.___.-._| . . . .
_(o).__(o).:_____
------------------------------------------------------------------------- Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________________ Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users Homepage: http://www.gnugk.org/
