since the remote gateway has sent the Call Proceeding and Progress Q.931
messages, then you should increase the Alerting timeout.
There could be one catch here for why the Alerting timeout couldn't work.
You are NOT receiving an ALERTING message from the remote
gateway, but CALL PROCEEDING & PROGRESS ones. You have to ask the engineer
at that remote gateway to send you ALERTING instead of
PROGRESS.
----- Original Message -----
From: <plamen@xxxxxxxxxxxxxxxxxx>
To: <openh323gk-users@xxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, August 25, 2005 8:24 AM
Subject: Re: [Openh323gk-users] increase discotect time
Thanks for this information but I need to chage Tomeout for PDD.
Please see attached file. There is time-graf of my problem call. GNUGK
send DRQ after 15 sec. In this time not possible receive connect from GW2.
Please help my to improve this problem.
Best regards
Plamen
try this :
SetupTimeout=4000
Default: 8000
A timeout value (in milliseconds) to wait for a first message (Setup)
to be received after a signaling TCP channel has been opended.
SignalTimeout=10000
Default: 15000
A timeout value (in milliseconds) to wait for a signalling channel to
be opened after an ACF message is sent or to wait for an Alerting
message after a signalling channel has been opened. This option can
be thought as a maximum allowed PDD (Post Dial Delay) value.
AlertingTimeout=60000
Default: 180000
A timeout value (in milliseconds) to wait for a Connect message after
a call entered Alerting state. This option can be thought as a
maximum "ringing time".
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________________
Posting: mailto:Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Unsubscribe: http://lists.sourceforge.net/lists/listinfo/openh323gk-users
Homepage: http://www.gnugk.org/
