It highly depends WHEN the calling endpoint sends the H.245 OLC message. The last chance to send H.245 OLC message is along with the CONNECT message. Some gateways send H.245 along with the SETUP message (descibed as "H245 early connect"). Use Ethereal as Stewart recommended and you will see what is going on. Also, H.245 tunelling has a little in common with the H245 routed section. IMHO if H.245 tunelling is enabled in both the gateways, then there is a little of sense (if any) to use the H245routed section in GnuGK. H245routed instructs gnugk that also the H.245 signalling shall be passed through the gatekeeper and not between the endpoints directly. Someone feel free to correct me if I am wrong. On Wednesday 20 October 2004 16:03, Ivan Mitev wrote: > hi stewart, > > first, sorry if the reply doesn't go into the thread, i'm just using the > re: subject since i'm not a list subscriber. > > the error is mine here, i pasted the wrong ACF log ; it's really 01116 > there...; i just did another test with 01130, and it's the same: > > ACF|192.168.0.70:1720|9599_endp|30272|01130:dialedDigits|drj_gw2:h323_ID=00 >502d00260a:h323_ID|false; DCF|192.168.0.70|9599_endp|30272|normalDrop; > > however, i found out that this happens only when enabling h245_tunneling on > the vip and having H245Routed=1 set on gnugk. with either one or the other > disabled, everything works well. i thought i tried to modify this parameter > long before this post when i was doing tests, but it seems i didn't, or > there was another problem at the same time :( > > > i guess that with H245Routed=1, gnugk waits for the logical channel(s) to > be established after the first ACF is logged. however the logical channels > are encapsulated in the call control channel when h245tunneling is enabled > on the vip, so it seems gnugk doesn't catch them. or, since i'm really far > from being a h323 guru, i'm completely wrong, which wouldn't surprise me. > the strange thing is that on the other gateways that have h245 tunneling, i > don't have this problem. > > stewart, do you have the same behavior with both h245 tunneling on your vip > and routing enabled in gnugk ? > > > thanks again for your help, > > ivan > > > ----- > > original message: > > Hi Ivan, > > > ACF|192.168.0.70:1720|9599_endp|30270|02116:dialedDigits|drj_gw2:h323_ID=00 >502d00260a:h323_ID|false; > > The 02116 in the ACF is very strange. Something (presumably the VIP or > the GK) is translating 01 to 02. From VIP command line do "atpm alist" and > be sure that the Address entry for "0" has Prefix strip = 0 and Prefix > Address = None. Make sure that this is the only entry starting with 0, and > that the atpm config is active and saved. > > Is there anything in your GK config that could be rewriting the number? > > If you can"t find anything obvious, run Ethereal and look at the number > in the ARQ and in the ACF to see where it is getting altered. > > I have some VIP-400 running with gnugk and can call from FXS ports ok. > > --Stewart > > > ------------------------------------------------------- > This SF.net email is sponsored by: IT Product Guide on ITManagersJournal > Use IT products in your business? Tell us what you think of them. Give us > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more > http://productguide.itmanagersjournal.com/guidepromo.tmpl > > _______________________________________________________ > > List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx > Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 > Homepage: http://www.gnugk.org/ -- Best regards, Teodor Georgiev Information Services Plc. Tel : +359 2 9656208 Mobile: +359 887 508989 ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________________ List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
