Is possible what I want ( PC ---internet ---PROXY----PC with gnugk) or I must change and put gnugk running in the Proxy?, because I'm tired of make round and don't see any unexpected change.
Thank for your patience.
Stewart Nelson escribió:
with
NetworkInterfaces=82.198.103.163/0,192.168.1.5/24,127.0.0.1/32
I can connect form out of the local net but not form the computer where the gnugk is running
I don't understand. Do you mean that you can connect from outside endpoints on the Internet, and also from other endpoints on your LAN, but not from the GK itself?
Right my internal land is only the PG where gk is running
Also, I'm curious why you list the loopback address. I would not expect it to be used, unless you connected to it explicitly.
because who I was connect from the same machine it was and other possibility, but if I cut it off I can't see any different
If you haven't already done so, try using 192.168.1.1 instead of 192.168.1.5
in your NetworkInterfaces . I don't know if it makes a difference, but
the documentation examples use the private gateway address.
I try both but there is no different but that if I cut out the loopback and put 1.1 it is impossible use the GKGUI connect at 192.168.1.5:7000 but this is normal.
with NetworkInterfaces=192.168.1.5/24,127.0.0.1/32 I can connect from local net but not from internet
This is to be expected; if the GK doesn't know the public address, connections from outside can't work.
I try with ethereal but realy I can't understand too much, I obtain only that wrong thin:
User Datagram Protocol, Src Port:32816 (32816),Dst Port: 1719 (1719) Source port: 32816 (32816) Destination port: 1719(1719) Length: 204 Checksum: 0x7cf4 (incorrect, should be 0xefba)
I don't understand why the checksum was corrupted, but is it correct that this capture was taken when you tried ohphone -g trujo.hn.org -u trujo -T -a antonio from your GK machine? If so, one should not expect this to work, because most NAT routers (I don't know if smoothwall is one of them) will not work properly when you access a forwarded port via its public address from inside the LAN.
Antonio Trujillo Carmona escribió:
Thank.
realy this was my third message and in the first I explain too much so I cut out the most of it in order to don't make it so big.
I try to make only changes that you say. I change only that Name=Trujillo NetworkInterfaces=82.198.103.163/0,192.168.1.5/24,127.0.0.1/32 StatusPort=7000
Right I try to connect from out side the smoothwall (PC1)with ohphone -g trujo.hn.org -u antonio --videoreceive x11 -T -a -l
and I obtain
Listening interfaces : ALL:1720 Gatekeeper set: Trujillo@xxxxxxxxxxxxxx Waiting for incoming calls for "antonio" Command ?
that's very good!
but I try from My (PC2) ohphone -g trujo.hn.org -u trujo -T -a antonio and obtain Error registering with gatekeeper at "trujo.hn.org"
As indicated above, I would expect this to fail.
with
ohphone -G Trujillo -u trujo -T -a antonio
obtain
Searching for gatekeeper with id "Trujillo" ...Error registering with gatekeeper at "Trujillo"
I don't know enough about ohphone to say whether this should work. Try the simpler case below.
with ohphone -g 192.168.1.5 -u trujo -T -a antonio Error registering with gatekeeper at "192.168.1.5"
I believe that this should work, or try ohphone -g 192.168.1.5 -i 192.168.1.5 -u trujo -T -a antonio in case ohphone is somehow using the loopback interface.
no that not work
It don't work (ifconfig eth0 add 192.168.1.6 and ohphone -g 192.168.1.5 -i 192.168.1.6 -u trujo -T -l), realy I don't try form other machine in the internal lan (I have 2 but I'm using 1 of then connect throw a phone to internet to probe.
If that and the changes to NetworkInterfaces don't help, try running Ethereal on this case to see what is going wrong.
If you have no problems with endpoints on the Internet, nor with endpoints on your LAN (other than the GK machine), and you really need to run an endpoint on the GK machine, you may be able to fix the problem by assigning a second private IP address to the GK machine, and binding the GK to one and the endpoint to the other.
I read that smoothwall has a ip_masq_h323 module. It's possible that that is interfering with the proxying that gnugk is doing. If it is enabled, see if turning it off helps. Of course, that would only affect endpoints on the Internet.
Good luck,
Stewart
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________________
List: Openh323gk-users@xxxxxxxxxxxxxxxxxxxxx Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
