What does the log file (trace level 5) says?
PS: Your config is very bad - please read carefully the manual.
At least you have to enable full routed mode to get the proxy
mode working (GKRouted,H245Routed).
----- Original Message -----
From: "Jan Riedinger" <jan.riedinger@ii7.de>
Sent: Tuesday, January 27, 2004 2:44 AM
> I'm trying to realize the following simply configuration:
>
> Cisco -> gnugk proxy -> Cisco
>
> I'm using the latest IOS version 12.3 (5a) and gnugk 2.2beta3 from December
> 2003. It seems that gnugk does not reat to any packets coming from my Cisco.
> At last I used the config below.
>
> What I'm doing wrong?
>
> Thank you very much for your help
> Jan Riedinger
>
>
> originating Cisco 3640:
> dial-peer voice 610 voip
> destination-pattern 403#491701860xxx
> session target ipv4:GKIPADRESS
> codec g729r8 bytes 60
> no vad
>
>
>
> [Gatekeeper::Main]
> Fourtytwo=42
> TimeToLive=600
>
> [RoutedMode]
> AcceptUnregisteredCalls=1
> GKRouted=0
> H245Routed=0
> CallSignalPort=1720
> CallSignalHandlerNumber=2
> RemoveH245AddressOnTunneling=1
> DropCallsByReleaseComplete=1
> SupportNATedEndpoints=1
> Q931PortRange=30000-39999
> H245PortRange=40000-49999
>
> [Proxy]
> Enable=1
> InternalNetwork=SUBNET WITH ORIGINATING CISCO
> T120PortRange=50000-59999
> RTPPortRange=50000-59999
>
> [GkStatus::Auth]
> rule=allow
>
> [RasSrv::GWPrefixes]
> GWB=403#
>
> [RasSrv::PermanentEndpoints]
> TERMGWIPADRESS=GWB;403#
> ORIGGWIPADRESS=gw-f;
>
> [RoutingPolicy]
> Default=internal
>
> [Endpoint]
> Type=Gateway
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
