Hello,
I'm trying to realize the following simply configuration:
Cisco -> gnugk proxy -> Cisco
I'm using the latest IOS version 12.3 (5a) and gnugk 2.2beta3 from December
2003. It seems that gnugk does not reat to any packets coming from my Cisco.
At last I used the config below.
What I'm doing wrong?
Thank you very much for your help
Jan Riedinger
originating Cisco 3640:
dial-peer voice 610 voip
destination-pattern 403#491701860xxx
session target ipv4:GKIPADRESS
codec g729r8 bytes 60
no vad
[Gatekeeper::Main]
Fourtytwo=42
TimeToLive=600
[RoutedMode]
AcceptUnregisteredCalls=1
GKRouted=0
H245Routed=0
CallSignalPort=1720
CallSignalHandlerNumber=2
RemoveH245AddressOnTunneling=1
DropCallsByReleaseComplete=1
SupportNATedEndpoints=1
Q931PortRange=30000-39999
H245PortRange=40000-49999
[Proxy]
Enable=1
InternalNetwork=SUBNET WITH ORIGINATING CISCO
T120PortRange=50000-59999
RTPPortRange=50000-59999
[GkStatus::Auth]
rule=allow
[RasSrv::GWPrefixes]
GWB=403#
[RasSrv::PermanentEndpoints]
TERMGWIPADRESS=GWB;403#
ORIGGWIPADRESS=gw-f;
[RoutingPolicy]
Default=internal
[Endpoint]
Type=Gateway
-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/
