Check the log file, make sure the destination gateway is registered with alias 'drbunsen' and the source gateway sends a Setup message with this changed alias. ----- Original Message ----- From: "Glen" <glen@timehost.net> Sent: Monday, January 26, 2004 7:40 PM > I can't get VirtualQueue's to work as expected. > > The call is being made from one cisco (10.10.10.1) to another > (10.10.11.1). > I route the call to 10.10.11.1 using RouteToAlias, but the > destination number is not being passed; gnugk doesn't even show any > response from the destination gateway. > > GNUGK Status Port: > > RouteRequest|10.10.10.1:1720|8027_endp|202|889549224295|9549221072:dialedDigits=pepe:h323_ID; > > rta drbunsen 8027_endp 202 > > ACF|10.10.10.1:1720|8027_endp|202|drbunsen:h323_ID|9549221072:dialedDigits=pepe:h323_ID|false; > DCF|10.10.10.1|8027_endp|202|normalDrop; > > > GNUGK Config: > > [CTI::Agents] > VirtualQueuePrefixes=88 > CTI_Timeout=10 ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
