My big problem is: If I have 2 GK, first one with GW Registered in and second one with ATA's Registed in, If for example I want to place a call from ATA to pstn, I think I have to send call coming from ATA to GW, that routes Call to PSTN. Example: GK2 [PermanendEndPoints] GW1=ipaddr;1# [Rewrite] 4=1#4 And with this call is sent to GW. On GW I have: Pots Incoming called-number 1# Port xx And that is all... But when I do that call is hang after 180 secs... I think this is because GW is registered against GK1 and call signalling have to pass through GK1, but in this case call is originated from another GK... -----Mensaje original----- De: openh323gk-users-admin@lists.sourceforge.net [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de Kompnet Enviado el: Viernes, 05 de Diciembre de 2003 07:53 a.m. Para: openh323gk-users@lists.sourceforge.net Asunto: Re: GK and redundancy and Backup Hi, Sebastian I didn't understand, if you really need to register Cisco with GK. You can to wright deal-peers without session-target ras, and describe session-targets both GK's. Or you can register Cisco with 1'st GK and describe session-target 2'nd GK IP. Of course, both GK's must support unregistered endpoints. Igor On 4 Декабрь 2003 20:25, Sebastian Nocetti wrote: > Hi.... I need somebody help configuring this > > I want to use 1 GK for some clients and other GK for other clients, > with different Rewrite Rules. Too I have A lot of Cisco 5300, that are > registeres against first GK. First GK is running with GKRouted=1, > H245Routed=1. > > I have first listening on an IP Address and second one on other.... > too these machines can see each other because they are connected too > to a Switch. > > I need to know how many concurrent calls GNUGK can suppor... because I > want to distribute it between two GK's. > > Other problem, when I place a call on second GK, and then route the > call to Cisco 5300, calls hangs after 2 minuts. Before on this list a > guy told me that it is because Cisco can be registered against only > one GK (first one) and how first GK is runnning in GKROuted and > H245Routed, all calls have to pass on first one. I tried to make is > work configuring like neighbours and it works, but I think all calls > are processed by first GK and I don't know if GNUGK can process 300 > simultaneus calls.... that's the reason I want to use 2 GK's. Some > clue?... How can I do that?... there is a manner to distribute > charge?.... All GW has to be registered against 1 GK because I use > same GW to route calls for first and second GK. > > Sorry my english, but I only speak spanish, if someone speak spanish > please contact me and I am going to explain it more clearly.... > > TX > > Sebastian. > > MSN: gnocetti@hotmail.com -- С уважением, Прохоров Игорь ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id-49 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id┘49 Homepage: http://www.gnugk.org/
