Yes, but how do you implement it with GNUGK? -----Mensaje original----- De: openh323gk-users-admin@lists.sourceforge.net [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de Williams, Allen Enviado el: Martes, 30 de Septiembre de 2003 02:15 p.m. Para: 'openh323gk-users@lists.sourceforge.net' Asunto: RE: Status Code = 0x10 on unanswered call This is the disconnect cause ("h323-disconnect-cause") that the GK sends as part of the standard configuration of RADIUS authentication. It is a Cisco VSA. The RFC also has something similar, but the GK evidently doesn't implement it, so I am parsing and using the text- based, Cisco version. Between the following two links, it is fully described: http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_programm ing_refe rence_guide09186a00800b5e17.html#147711 http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_ referenc e_chapter09186a00801601d2.html -------------------------------- Thanks, Allen Williams allen.williams@harris.com (321)726-1419 -----Original Message----- From: Sebastian Nocetti [mailto:snocetti@fibertel.com.ar] Sent: Tuesday, September 30, 2003 11:23 AM To: openh323gk-users@lists.sourceforge.net Subject: RE: Status Code = 0x10 on unanswered call A questio, how I can configure GK to obtain this disconnect Cause?... I am not using Radius, but if I have, I'd like you explain me how to do that... Thanks. -----Mensaje original----- De: openh323gk-users-admin@lists.sourceforge.net [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de Vance Shipley Enviado el: Martes, 30 de Septiembre de 2003 10:52 a.m. Para: Williams, Allen CC: openh323gk-users@lists.sourceforge.net Asunto: Re: Status Code = 0x10 on unanswered call Allen, The normal case would be for the originating end to release with a disconnect cause of "Normal Call Clearing". You may see the destination end release with a cause code of "No Answer from User (User Alerted)" if a switch in the path expired a timer limiting the time a call may spend alerting. Sixty seconds is a common limit on international gateway switches. -Vance On Tue, Sep 30, 2003 at 08:09:52AM -0400, Williams, Allen wrote: } I'm getting a h323-disconnect-cause of 0x10 (supposedly completed call?) on } calls that are ring- no answer and show a acct-session-time of 0. Shouldn't the } disconnect cause be 0x13, "No Answer from User (User Alerted)"? ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
