You turn on RADIUS accounting in the GK- but to do anything with it you have to be talking to a RADIUS server that will parse it and do something intelligent with it (like construct a CDR and price the CDDR based on the disconnect code, duration, dialed no., etc.). However, the same disconnect code may show up in the CDR that comes over the status port. Someone else may be able to answer that question. Since I'm using RADIUS, I'm not right now listening to the status port; but I am writing a piece to do that as a back up to the RADIUS interface. I know the CDR format from the status port is in the documentation. Thanks, -------------------------------- anw -----Original Message----- From: Sebastian Nocetti [mailto:snocetti@fibertel.com.ar] Sent: Tuesday, September 30, 2003 2:42 PM To: openh323gk-users@lists.sourceforge.net Subject: RE: Status Code = 0x10 on unanswered call Yes, but how do you implement it with GNUGK? -----Mensaje original----- De: openh323gk-users-admin@lists.sourceforge.net [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de Williams, Allen Enviado el: Martes, 30 de Septiembre de 2003 02:15 p.m. Para: 'openh323gk-users@lists.sourceforge.net' Asunto: RE: Status Code = 0x10 on unanswered call This is the disconnect cause ("h323-disconnect-cause") that the GK sends as part of the standard configuration of RADIUS authentication. It is a Cisco VSA. The RFC also has something similar, but the GK evidently doesn't implement it, so I am parsing and using the text- based, Cisco version. Between the following two links, it is fully described: http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_programm ing_refe rence_guide09186a00800b5e17.html#147711 http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_ referenc e_chapter09186a00801601d2.html -------------------------------- Thanks, Allen Williams allen.williams@harris.com (321)726-1419 -----Original Message----- From: Sebastian Nocetti [mailto:snocetti@fibertel.com.ar] Sent: Tuesday, September 30, 2003 11:23 AM To: openh323gk-users@lists.sourceforge.net Subject: RE: Status Code = 0x10 on unanswered call A questio, how I can configure GK to obtain this disconnect Cause?... I am not using Radius, but if I have, I'd like you explain me how to do that... Thanks. -----Mensaje original----- De: openh323gk-users-admin@lists.sourceforge.net [mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de Vance Shipley Enviado el: Martes, 30 de Septiembre de 2003 10:52 a.m. Para: Williams, Allen CC: openh323gk-users@lists.sourceforge.net Asunto: Re: Status Code = 0x10 on unanswered call Allen, The normal case would be for the originating end to release with a disconnect cause of "Normal Call Clearing". You may see the destination end release with a cause code of "No Answer from User (User Alerted)" if a switch in the path expired a timer limiting the time a call may spend alerting. Sixty seconds is a common limit on international gateway switches. -Vance On Tue, Sep 30, 2003 at 08:09:52AM -0400, Williams, Allen wrote: } I'm getting a h323-disconnect-cause of 0x10 (supposedly completed call?) on } calls that are ring- no answer and show a acct-session-time of 0. Shouldn't the } disconnect cause be 0x13, "No Answer from User (User Alerted)"? ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ List: Openh323gk-users@lists.sourceforge.net Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549 Homepage: http://www.gnugk.org/
