RE: Status Code = 0x10 on unanswered call

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is the disconnect cause ("h323-disconnect-cause") that the GK sends as part
of the standard configuration of RADIUS authentication.  It is a Cisco VSA.  The
RFC also has something similar, but the GK evidently doesn't implement it, so I
am parsing and using the text- based, Cisco version.  Between the following two
links, it is fully described:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_programming_refe
rence_guide09186a00800b5e17.html#147711

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_referenc
e_chapter09186a00801601d2.html

--------------------------------
Thanks,
Allen Williams
allen.williams@harris.com
(321)726-1419


-----Original Message-----
From: Sebastian Nocetti [mailto:snocetti@fibertel.com.ar]
Sent: Tuesday, September 30, 2003 11:23 AM
To: openh323gk-users@lists.sourceforge.net
Subject: RE:  Status Code = 0x10 on unanswered call


A questio, how I can configure GK to obtain this disconnect Cause?... I
am not using Radius, but if I have, I'd like you explain me how to do
that... Thanks.

-----Mensaje original-----
De: openh323gk-users-admin@lists.sourceforge.net
[mailto:openh323gk-users-admin@lists.sourceforge.net] En nombre de Vance
Shipley
Enviado el: Martes, 30 de Septiembre de 2003 10:52 a.m.
Para: Williams, Allen
CC: openh323gk-users@lists.sourceforge.net
Asunto: Re:  Status Code = 0x10 on unanswered call


Allen,

The normal case would be for the originating end to release with a 
disconnect cause of "Normal Call Clearing".  You may see the destination
end release with a cause code of "No  Answer from User (User Alerted)"
if a switch in the path expired a timer limiting the time a call may
spend alerting.  Sixty seconds is a common limit on international
gateway switches.

	-Vance


On Tue, Sep 30, 2003 at 08:09:52AM -0400, Williams, Allen wrote: }  I'm
getting a h323-disconnect-cause of 0x10 (supposedly completed call?) on
}  calls that are ring- no answer and show a acct-session-time of 0.
Shouldn't the }  disconnect cause be 0x13, "No  Answer from User (User
Alerted)"?


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf _______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
List: Openh323gk-users@lists.sourceforge.net
Archive: http://sourceforge.net/mailarchive/forum.php?forum_id=8549
Homepage: http://www.gnugk.org/

[Index of Archives]     [SIP]     [Open H.323]     [Gnu Gatekeeper]     [Asterisk PBX]     [ISDN Cause Codes]     [Yosemite News]

  Powered by Linux