Stas, http://gluster.org/docs/index.php/NUFA_with_single_process will help you setup NUFA. -- gowda On Sun, Dec 28, 2008 at 4:44 AM, Stas Oskin <stas.oskin at gmail.com> wrote: > Hi. > > I'm looking to run GlusterFS in NUFA approach for 2 servers in following > configuration: > > /dev/md2 4.8G 1.1G 3.5G 25% / > /dev/sda5 357G 195M 339G 1% /disk1 > /dev/sdb5 357G 195M 339G 1% /disk2 > /dev/sdc3 357G 195M 339G 1% /disk3 > /dev/sdd3 357G 195M 339G 1% /disk4 > /dev/md0 190M 12M 169M 7% /boot > > Where the data would be located on sda/b/c/d disks. > > I studied the volume file syntax, but couldn't understand how to create a > file to unify all these disks into one volume. > > If someone could post a sample file, which does a NUFA setup for 2 servers > with such disks topology + AFR between them, so I could get started with it, > I'd much appreciate it. > > Thanks in advance. > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > -- hard work often pays off after time, but laziness always pays off now -------------- next part -------------- An HTML attachment was scrubbed... URL: http://zresearch.com/pipermail/gluster-users/attachments/20081228/213e76b9/attachment.htm