Hi. Can you advice regarding the below? Regards. 2008/12/28 Stas Oskin <stas.oskin at gmail.com> > Hi. > > Thanks for the link, but I already seen it. > > What I need to know, is how to include in volume the separate disk drives > that I have on the server. > Also, how to set an AFR there. > > Regards. > > > 2008/12/28 Basavanagowda Kanur <gowda at zresearch.com> > > Stas, >> http://gluster.org/docs/index.php/NUFA_with_single_process will help you >> setup NUFA. >> >> -- >> gowda >> >> On Sun, Dec 28, 2008 at 4:44 AM, Stas Oskin <stas.oskin at gmail.com> wrote: >> >>> Hi. >>> >>> I'm looking to run GlusterFS in NUFA approach for 2 servers in following >>> configuration: >>> >>> /dev/md2 4.8G 1.1G 3.5G 25% / >>> /dev/sda5 357G 195M 339G 1% /disk1 >>> /dev/sdb5 357G 195M 339G 1% /disk2 >>> /dev/sdc3 357G 195M 339G 1% /disk3 >>> /dev/sdd3 357G 195M 339G 1% /disk4 >>> /dev/md0 190M 12M 169M 7% /boot >>> >>> Where the data would be located on sda/b/c/d disks. >>> >>> I studied the volume file syntax, but couldn't understand how to create a >>> file to unify all these disks into one volume. >>> >>> If someone could post a sample file, which does a NUFA setup for 2 >>> servers with such disks topology + AFR between them, so I could get started >>> with it, I'd much appreciate it. >>> >>> Thanks in advance. >>> >>> _______________________________________________ >>> Gluster-users mailing list >>> Gluster-users at gluster.org >>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users >>> >>> >> >> >> -- >> hard work often pays off after time, but laziness always pays off now >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://zresearch.com/pipermail/gluster-users/attachments/20081229/2e515ff5/attachment-0001.htm