On Thu, Sep 06, 2012 at 02:34:00PM +0200, Thomas Gummerer wrote: > On 09/06, Jan-Marek Glogowski wrote: > > This adds the test ID (tXXXX) prefix to the test result message of > > all shell tests. This is especially useful when doing a parallel > > check run, where it's currently quite hard to identify the actual > > failing test case. > > > > Signed-off-by: Jan-Marek Glogowski <glogow@xxxxxxxxxx> > > This breaks the TAP output format of the tests, which is needed to run > them with prove. To identify the failing tests more easily when running > the tests in parallel, you may want to add GIT_TEST_TARGET = prove to > your config.mak. Yeah, I would second the suggestion to just use "prove". However, if for some reason that isn't an option, note that the stock harness stores results in test-results/. You can just grep it like this: grep 'failed [^0]' test-results/* to find out which scripts had failures, which is usually sufficient (if you're running the tests in parallel, you won't have any sensible output anyway, so your first step is going to be to rerun the failed script with "-v" anyway). But really, "prove" is much nicer, and I recommend it unless you don't have perl on your system. -Peff -- To unsubscribe from this list: send the line "unsubscribe git" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html