On 09/06, Jan-Marek Glogowski wrote:
> This adds the test ID (tXXXX) prefix to the test result message of
> all shell tests. This is especially useful when doing a parallel
> check run, where it's currently quite hard to identify the actual
> failing test case.
>
> Signed-off-by: Jan-Marek Glogowski <glogow@xxxxxxxxxx>
This breaks the TAP output format of the tests, which is needed to run
them with prove. To identify the failing tests more easily when running
the tests in parallel, you may want to add GIT_TEST_TARGET = prove to
your config.mak.
If this change is really needed, I think you should add the test-id after
the message.
> ---
> t/t0000-basic.sh | 28 ++++++++++++++--------------
> t/test-lib-functions.sh | 11 +++++++----
> t/test-lib.sh | 10 ++++++----
> 3 Dateien geändert, 27 Zeilen hinzugefügt(+), 22 Zeilen entfernt(-)
>
> diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
> index ccb5435..1bbf5b8 100755
> --- a/t/t0000-basic.sh
> +++ b/t/t0000-basic.sh
> @@ -58,7 +58,7 @@ test_expect_failure 'pretend we have a known breakage' '
> test_expect_success 'pretend we have fixed a known breakage (run in sub test-lib)' "
> mkdir passing-todo &&
> (cd passing-todo &&
> - cat >passing-todo.sh <<-EOF &&
> + cat >0000t05-passing-todo.sh <<-EOF &&
> #!$SHELL_PATH
>
> test_description='A passing TODO test
> @@ -77,14 +77,14 @@ test_expect_success 'pretend we have fixed a known breakage (run in sub test-lib
>
> test_done
> EOF
> - chmod +x passing-todo.sh &&
> - ./passing-todo.sh >out 2>err &&
> + chmod +x 0000t05-passing-todo.sh &&
> + ./0000t05-passing-todo.sh >out 2>err &&
> ! test -s err &&
> sed -e 's/^> //' >expect <<-\\EOF &&
> - > ok 1 - pretend we have fixed a known breakage # TODO known breakage
> - > # fixed 1 known breakage(s)
> - > # passed all 1 test(s)
> - > 1..1
> + > 0000t05: ok 1 - pretend we have fixed a known breakage # TODO known breakage
> + > 0000t05: # fixed 1 known breakage(s)
> + > 0000t05: # passed all 1 test(s)
> + > 0000t05: 1..1
> EOF
> test_cmp expect out)
> "
> @@ -141,7 +141,7 @@ test_expect_success 'tests clean up even on failures' "
> (
> cd failing-cleanup &&
>
> - cat >failing-cleanup.sh <<-EOF &&
> + cat >0000t12-failing-cleanup.sh <<-EOF &&
> #!$SHELL_PATH
>
> test_description='Failing tests with cleanup commands'
> @@ -162,23 +162,23 @@ test_expect_success 'tests clean up even on failures' "
>
> EOF
>
> - chmod +x failing-cleanup.sh &&
> - test_must_fail ./failing-cleanup.sh >out 2>err &&
> + chmod +x 0000t12-failing-cleanup.sh &&
> + test_must_fail ./0000t12-failing-cleanup.sh >out 2>err &&
> ! test -s err &&
> ! test -f \"trash directory.failing-cleanup/clean-after-failure\" &&
> sed -e 's/Z$//' -e 's/^> //' >expect <<-\\EOF &&
> - > not ok - 1 tests clean up even after a failure
> + > 0000t12: not ok 1 - tests clean up even after a failure
> > # Z
> > # touch clean-after-failure &&
> > # test_when_finished rm clean-after-failure &&
> > # (exit 1)
> > # Z
> - > not ok - 2 failure to clean up causes the test to fail
> + > 0000t12: not ok 2 - failure to clean up causes the test to fail
> > # Z
> > # test_when_finished \"(exit 2)\"
> > # Z
> - > # failed 2 among 2 test(s)
> - > 1..2
> + > 0000t12: # failed 2 among 2 test(s)
> + > 0000t12: 1..2
> EOF
> test_cmp expect out
> )
> diff --git a/t/test-lib-functions.sh b/t/test-lib-functions.sh
> index 9bc57d2..c81ad7f 100644
> --- a/t/test-lib-functions.sh
> +++ b/t/test-lib-functions.sh
> @@ -24,6 +24,9 @@
> #
> # In particular, quoting isn't enough, as the path may contain the same quote
> # that we're using.
> +
> +TID=$(basename ${0%%-*})
> +
> test_set_editor () {
> FAKE_EDITOR="$1"
> export FAKE_EDITOR
> @@ -434,7 +437,7 @@ test_external_without_stderr () {
> test_path_is_file () {
> if ! [ -f "$1" ]
> then
> - echo "File $1 doesn't exist. $*"
> + echo "$TID: File $1 doesn't exist. $*"
> false
> fi
> }
> @@ -442,7 +445,7 @@ test_path_is_file () {
> test_path_is_dir () {
> if ! [ -d "$1" ]
> then
> - echo "Directory $1 doesn't exist. $*"
> + echo "$TID: Directory $1 doesn't exist. $*"
> false
> fi
> }
> @@ -450,7 +453,7 @@ test_path_is_dir () {
> test_path_is_missing () {
> if [ -e "$1" ]
> then
> - echo "Path exists:"
> + echo "$TID: Path exists:"
> ls -ld "$1"
> if [ $# -ge 1 ]; then
> echo "$*"
> @@ -476,7 +479,7 @@ test_line_count () {
> error "bug in the test script: not 3 parameters to test_line_count"
> elif ! test $(wc -l <"$3") "$1" "$2"
> then
> - echo "test_line_count: line count for $3 !$1 $2"
> + echo "$TID: test_line_count: line count for $3 !$1 $2"
> cat "$3"
> return 1
> fi
> diff --git a/t/test-lib.sh b/t/test-lib.sh
> index 78c4286..6fccbe9 100644
> --- a/t/test-lib.sh
> +++ b/t/test-lib.sh
> @@ -31,6 +31,8 @@ done,*)
> ;;
> esac
>
> +TID=$(basename ${0%%-*})
> +
> # Keep the original TERM for say_color
> ORIGINAL_TERM=$TERM
>
> @@ -185,7 +187,7 @@ if test -n "$color"; then
> *) test -n "$quiet" && return;;
> esac
> shift
> - printf "%s" "$*"
> + printf "$TID: %s" "$*"
> tput sgr0
> echo
> )
> @@ -194,12 +196,12 @@ else
> say_color() {
> test -z "$1" && test -n "$quiet" && return
> shift
> - echo "$*"
> + echo "$TID: $*"
> }
> fi
>
> error () {
> - say_color error "error: $*"
> + say_color error "$TID: error: $*"
> GIT_EXIT_OK=t
> exit 1
> }
> @@ -262,7 +264,7 @@ test_ok_ () {
>
> test_failure_ () {
> test_failure=$(($test_failure + 1))
> - say_color error "not ok - $test_count $1"
> + say_color error "not ok $test_count - $1"
> shift
> echo "$@" | sed -e 's/^/# /'
> test "$immediate" = "" || { GIT_EXIT_OK=t; exit 1; }
> --
> 1.7.11.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe git" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe git" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html