On Thu, Apr 27, 2023 at 4:34 PM Francesco Dolcini <francesco@xxxxxxxxxx> wrote:
>
> From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
>
> Always enable HS video mode setting the TXMD bit, without this change no
> video output is present with DSI sinks that are setting
> MIPI_DSI_MODE_LPM flag (tested with LT8912B DSI-HDMI bridge).
>
> Previously the driver was enabling HS mode only when the DSI sink was
> not explicitly setting the MIPI_DSI_MODE_LPM, however this is not
> correct.
>
> The MIPI_DSI_MODE_LPM is supposed to indicate that the sink is willing
> to receive data in low power mode, however clearing the
> TC358768_DSI_CONTROL_TXMD bit will make the TC358768 send video in
> LP mode that is not the intended behavior.
>
> Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
> Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> ---
> drivers/gpu/drm/bridge/tc358768.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358768.c b/drivers/gpu/drm/bridge/tc358768.c
> index 7c0cbe84611b..8f349bf4fc32 100644
> --- a/drivers/gpu/drm/bridge/tc358768.c
> +++ b/drivers/gpu/drm/bridge/tc358768.c
> @@ -866,8 +866,7 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
> val = TC358768_DSI_CONFW_MODE_SET | TC358768_DSI_CONFW_ADDR_DSI_CONTROL;
> val |= (dsi_dev->lanes - 1) << 1;
>
> - if (!(dsi_dev->mode_flags & MIPI_DSI_MODE_LPM))
> - val |= TC358768_DSI_CONTROL_TXMD;
> + val |= TC358768_DSI_CONTROL_TXMD;
>
> if (!(mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
> val |= TC358768_DSI_CONTROL_HSCKMD;
> --
> 2.25.1
>
Reviewed-by: Robert Foss <rfoss@xxxxxxxxxx>
