Hello Sam,
On 2/1/22 21:40, Sam Ravnborg wrote:
[snip]
>
> I took a look at the datasheets - and all ssd1305, ssd1306 and ssd1307
> are the same. They have timing constrains on the Vcc.
> The random schematic I found on the net showed me that a PWM was used to
> control the Vcc voltage - which again is used to control the brightness.
>
> All the above has nothing to do with backlight - I had this mixed up in
> my head.
>
Yes, same here. I was leaning towards fixing the DT binding but then due
Geert comment and after reading the datasheets for ssd130{5,6,7} like you
I had the same understanding.
Glad that you agree.
[snip]
>
> Last I recommend to drop the fbdev variant - if the drm driver has any
> regressions we can fix them. And I do not see any other way to move
> users over. Unless their setup breaks then they do not change.
>
As I mentioned in this thread I wouldn't propose to drop the fbdev variant.
I prefer to use the carrot and not the stick. Peter Robinson suggested to
make the driver mutually exclusive and add !FB_SSD1307 in the config symbol.
I think that makes sense and will do it in v2.
Best regards,
--
Javier Martinez Canillas
Linux Engineering
Red Hat
