On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal is not connected to a physical pin, leading to confusion when the dw-hdmi cec controller can't communicate on the bus. Disable it to avoid exposing a non-functinal bus. Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx> --- drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/meson/meson_dw_hdmi.c b/drivers/gpu/drm/meson/meson_dw_hdmi.c index aad75a22dc33..2ed87cfdd735 100644 --- a/drivers/gpu/drm/meson/meson_dw_hdmi.c +++ b/drivers/gpu/drm/meson/meson_dw_hdmi.c @@ -1103,6 +1103,7 @@ static int meson_dw_hdmi_bind(struct device *dev, struct device *master, dw_plat_data->phy_data = meson_dw_hdmi; dw_plat_data->input_bus_encoding = V4L2_YCBCR_ENC_709; dw_plat_data->ycbcr_420_allowed = true; + dw_plat_data->disable_cec = true; if (dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxl-dw-hdmi") || dw_hdmi_is_compatible(meson_dw_hdmi, "amlogic,meson-gxm-dw-hdmi") || -- 2.25.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
