From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.
On some SoCs, the CEC functionality is enabled in the IP config bits, but the
CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
confusion when the DW-HDMI CEC controller can't communicate on the bus.
Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
include/drm/bridge/dw_hdmi.h | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index dda4fa9a1a08..ae97513ef886 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -3421,7 +3421,7 @@ struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
hdmi->audio = platform_device_register_full(&pdevinfo);
}
- if (config0 & HDMI_CONFIG0_CEC) {
+ if (!plat_data->disable_cec && (config0 & HDMI_CONFIG0_CEC)) {
cec.hdmi = hdmi;
cec.ops = &dw_hdmi_cec_ops;
cec.irq = irq;
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h
index ea34ca146b82..6a5716655619 100644
--- a/include/drm/bridge/dw_hdmi.h
+++ b/include/drm/bridge/dw_hdmi.h
@@ -153,6 +153,8 @@ struct dw_hdmi_plat_data {
const struct dw_hdmi_phy_config *phy_config;
int (*configure_phy)(struct dw_hdmi *hdmi, void *data,
unsigned long mpixelclock);
+
+ unsigned int disable_cec : 1;
};
struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
