This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.
On some SoCs, the CEC functionality is enabled in the IP config bits, but the
CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
confusion when the DW-HDMI CEC controller can't communicate on the bus.
Jernej Skrabec (1):
drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC
driver
Neil Armstrong (1):
drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
drivers/gpu/drm/meson/meson_dw_hdmi.c | 1 +
include/drm/bridge/dw_hdmi.h | 2 ++
3 files changed, 4 insertions(+), 1 deletion(-)
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
