[PATCH 00/18] drm/vc4: hdmi: Add Support for the YUV output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Here's an attempt at support the HDMI YUV output on the BCM2711 SoC found on
the RaspberryPi4.

I took the same approach than what dw-hdmi did already, turning a bunch of
functions found in that driver into helpers since they were fairly generic.

However, it feels a bit clunky overall and there's a few rough edges that
should be addressed in a generic manner:

  - while the format negociation makes sense for a bridge, it feels a bit
    over-engineered for a simple encoder where that setting could be a simple
    switch (and possibly a property?)

  - more importantly, whether we're choosing an YUV output or not is completely
    hidden away from the userspace even though it might have some effect on the
    visual quality output (thinking about YUV420 and YUV422 here mostly).

  - Similarly, the list we report is static and the userspace cannot change or
    force one mode over the other. We will always pick YUV444 over RGB444 if
    both are available for example.

While the first one might just be due to a lack of helpers, the second and
third ones are also feeling a bit inconsistent with how we're handling the
10/12 bit output for example

Let me know what you think,
Maxime

Maxime Ripard (18):
  drm: Introduce new HDMI helpers
  drm/bridge: Add HDMI output fmt helper
  drm/bridge: dw-hdmi: Use helpers
  drm/vc4: txp: Properly set the possible_crtcs mask
  drm/vc4: crtc: Skip the TXP
  drm/vc4: Rework the encoder retrieval code
  drm/vc4: hdmi: Add full range RGB helper
  drm/vc4: hdmi: Use full range helper in csc functions
  drm/vc4: hdmi: Remove limited_rgb_range
  drm/vc4: hdmi: Convert to bridge
  drm/vc4: hdmi: Move XBAR setup to csc_setup
  drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
  drm/vc4: hdmi: Define colorspace matrices
  drm/vc4: hdmi: Change CSC callback prototype
  drm/vc4: hdmi: Rework the infoframe prototype
  drm/vc4: hdmi: Support HDMI YUV output
  drm/vc4: hdmi: Move the pixel rate calculation to a helper
  drm/vc4: hdmi: Force YUV422 if the rate is too high

 drivers/gpu/drm/Makefile                  |   2 +-
 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 268 ++-------------
 drivers/gpu/drm/drm_bridge.c              | 118 +++++++
 drivers/gpu/drm/drm_hdmi.c                | 170 +++++++++
 drivers/gpu/drm/vc4/vc4_crtc.c            |  59 +++-
 drivers/gpu/drm/vc4/vc4_drv.c             |  41 +++
 drivers/gpu/drm/vc4/vc4_drv.h             |  26 +-
 drivers/gpu/drm/vc4/vc4_hdmi.c            | 399 +++++++++++++++-------
 drivers/gpu/drm/vc4/vc4_hdmi.h            |  13 +-
 drivers/gpu/drm/vc4/vc4_hdmi_regs.h       |   6 +
 drivers/gpu/drm/vc4/vc4_regs.h            |  19 ++
 drivers/gpu/drm/vc4/vc4_txp.c             |   2 +-
 include/drm/drm_bridge.h                  |   6 +
 include/drm/drm_hdmi.h                    |  24 ++
 14 files changed, 770 insertions(+), 383 deletions(-)
 create mode 100644 drivers/gpu/drm/drm_hdmi.c
 create mode 100644 include/drm/drm_hdmi.h

-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux