Hi! Dne sreda, 17. marec 2021 ob 16:43:34 CET je Maxime Ripard napisal(a): > Hi, > > Here's an attempt at support the HDMI YUV output on the BCM2711 SoC found on > the RaspberryPi4. > > I took the same approach than what dw-hdmi did already, turning a bunch of > functions found in that driver into helpers since they were fairly generic. > > However, it feels a bit clunky overall and there's a few rough edges that > should be addressed in a generic manner: > > - while the format negociation makes sense for a bridge, it feels a bit > over-engineered for a simple encoder where that setting could be a simple > switch (and possibly a property?) Property could work, but possible values should be then limited to cross section of HW and connected display capabilities. > > - more importantly, whether we're choosing an YUV output or not is completely > hidden away from the userspace even though it might have some effect on the > visual quality output (thinking about YUV420 and YUV422 here mostly). IMO driver should select highest achievable quality. So in case of YUV420 and YUV422, later should be selected. This should be the case even if the property is implemented. Best regards, Jernej > > - Similarly, the list we report is static and the userspace cannot change or > force one mode over the other. We will always pick YUV444 over RGB444 if > both are available for example. > > While the first one might just be due to a lack of helpers, the second and > third ones are also feeling a bit inconsistent with how we're handling the > 10/12 bit output for example > > Let me know what you think, > Maxime > > Maxime Ripard (18): > drm: Introduce new HDMI helpers > drm/bridge: Add HDMI output fmt helper > drm/bridge: dw-hdmi: Use helpers > drm/vc4: txp: Properly set the possible_crtcs mask > drm/vc4: crtc: Skip the TXP > drm/vc4: Rework the encoder retrieval code > drm/vc4: hdmi: Add full range RGB helper > drm/vc4: hdmi: Use full range helper in csc functions > drm/vc4: hdmi: Remove limited_rgb_range > drm/vc4: hdmi: Convert to bridge > drm/vc4: hdmi: Move XBAR setup to csc_setup > drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines > drm/vc4: hdmi: Define colorspace matrices > drm/vc4: hdmi: Change CSC callback prototype > drm/vc4: hdmi: Rework the infoframe prototype > drm/vc4: hdmi: Support HDMI YUV output > drm/vc4: hdmi: Move the pixel rate calculation to a helper > drm/vc4: hdmi: Force YUV422 if the rate is too high > > drivers/gpu/drm/Makefile | 2 +- > drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 268 ++------------- > drivers/gpu/drm/drm_bridge.c | 118 +++++++ > drivers/gpu/drm/drm_hdmi.c | 170 +++++++++ > drivers/gpu/drm/vc4/vc4_crtc.c | 59 +++- > drivers/gpu/drm/vc4/vc4_drv.c | 41 +++ > drivers/gpu/drm/vc4/vc4_drv.h | 26 +- > drivers/gpu/drm/vc4/vc4_hdmi.c | 399 +++++++++++++++------- > drivers/gpu/drm/vc4/vc4_hdmi.h | 13 +- > drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 6 + > drivers/gpu/drm/vc4/vc4_regs.h | 19 ++ > drivers/gpu/drm/vc4/vc4_txp.c | 2 +- > include/drm/drm_bridge.h | 6 + > include/drm/drm_hdmi.h | 24 ++ > 14 files changed, 770 insertions(+), 383 deletions(-) > create mode 100644 drivers/gpu/drm/drm_hdmi.c > create mode 100644 include/drm/drm_hdmi.h > > -- > 2.30.2 > > _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
