Hi Paul > > > >> >> + > > > >> >> +maintainers: > > > >> >> + - Paul Cercueil <paul@xxxxxxxxxxxxxxx> > > > >> >> + > > > >> >> +allOf: > > > >> >> + - $ref: panel-common.yaml# > > > >> >> + > > > >> >> +properties: > > > >> >> + compatible: > > > >> >> + const: abt,y030xx067a > > > >> >> + > > > >> >> + backlight: true > > > >> >> + port: true > > > >> >> + power-supply: true > > > >> >> + reg: true > > > >> >> + reset-gpios: true > > > >> > > > > >> > The binding is missing: > > > >> > required: > > > >> > - compatible > > > >> > - reg > > > >> > - power-supply > > > >> > - reset-gpios > > > >> > - ... > > > >> > > > > >> > additionalProperties: false > > > >> > > > > >> > So r-b only with these added. > > > >> > > > >> Stupid mistake, sorry about that. > > > >> > > > >> I'll V2. > > > > > > > > I don't have any V2 in my inbox, but looks like it is in > > > linux-next > > > > now: > > > > > > Yes, Sam told me on IRC I could fix it while applying and avoid the > > > V2. > > > > > > > /builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: > > > > panel@0: 'spi-max-frequency' does not match any of the regexes: > > > > 'pinctrl-[0-9]+' > > > > From schema: > > > > /builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml > > > > > > "make dt_binding_check > > > DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml" > > > doesn't complain here :( > > > > Even if you do 'touch > > Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml' > > or do a clean build? > > > > I can't think of any kernel or dt-schema changes which would explain > > the difference. This is purely related to 'additionalProperties: > > false'. > > Ok, I see it now. > Should I use 'unevaluatedProperties: false' instead? Yes, the issue here is that you add a number of spi properties to the binding. And you cannot or at least shall not, list them all in this binding. So when evaluating the binding the spi-max-frequency should be allowed, and when a full DT file is checked the tools will catch it there is a binding that is not known - as you tell it with "unevaluatedProperties: false" that all prperties must be known. Sam _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
