Add support for the ShenZhen Asia Better Technology Ltd. Y030XX067A 3.0"
320x480 IPS panel.
This panel can be found in the YLM RG-280M, RG-300 and RG-99 handheld
gaming consoles. While being 320x480, it is actually a horizontal 4:3
panel with non-square pixels.
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Signed-off-by: Christophe Branchereau <cbranchereau@xxxxxxxxx>
---
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-abt-y030xx067a.c | 363 +++++++++++++++++++
3 files changed, 373 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-abt-y030xx067a.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index e386524b2d77..7fe22b4c8aa2 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -8,6 +8,15 @@ config DRM_PANEL
menu "Display Panels"
depends on DRM && DRM_PANEL
+config DRM_PANEL_ABT_Y030XX067A
+ tristate "ABT Y030XX067A 320x480 LCD panel"
+ depends on OF && SPI
+ select REGMAP_SPI
+ help
+ Say Y here to enable support for the Asia Better Technology Ltd.
+ Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
+ and RG-99 handheld gaming consoles.
+
config DRM_PANEL_ARM_VERSATILE
tristate "ARM Versatile panel driver"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index d1f8cc572f37..78b77ba4d458 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_DRM_PANEL_ABT_Y030XX067A) += panel-abt-y030xx067a.o
obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
obj-$(CONFIG_DRM_PANEL_ASUS_Z00T_TM5P5_NT35596) += panel-asus-z00t-tm5p5-n35596.o
obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o
diff --git a/drivers/gpu/drm/panel/panel-abt-y030xx067a.c b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
new file mode 100644
index 000000000000..2d8794d495d0
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-abt-y030xx067a.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Asia Better Technology Ltd. Y030XX067A IPS LCD panel driver
+ *
+ * Copyright (C) 2020, Paul Cercueil <paul@xxxxxxxxxxxxxxx>
+ * Copyright (C) 2020, Christophe Branchereau <cbranchereau@xxxxxxxxx>
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/media-bus-format.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+#define REG00_VBRT_CTRL(val) (val)
+
+#define REG01_COM_DC(val) (val)
+
+#define REG02_DA_CONTRAST(val) (val)
+#define REG02_VESA_SEL(val) ((val) << 5)
+#define REG02_COMDC_SW BIT(7)
+
+#define REG03_VPOSITION(val) (val)
+#define REG03_BSMOUNT BIT(5)
+#define REG03_COMTST BIT(6)
+#define REG03_HPOSITION1 BIT(7)
+
+#define REG04_HPOSITION1(val) (val)
+
+#define REG05_CLIP BIT(0)
+#define REG05_NVM_VREFRESH BIT(1)
+#define REG05_SLFR BIT(2)
+#define REG05_SLBRCHARGE(val) ((val) << 3)
+#define REG05_PRECHARGE_LEVEL(val) ((val) << 6)
+
+#define REG06_TEST5 BIT(0)
+#define REG06_SLDWN BIT(1)
+#define REG06_SLRGT BIT(2)
+#define REG06_TEST2 BIT(3)
+#define REG06_XPSAVE BIT(4)
+#define REG06_GAMMA_SEL(val) ((val) << 5)
+#define REG06_NT BIT(7)
+
+#define REG07_TEST1 BIT(0)
+#define REG07_HDVD_POL BIT(1)
+#define REG07_CK_POL BIT(2)
+#define REG07_TEST3 BIT(3)
+#define REG07_TEST4 BIT(4)
+#define REG07_480_LINEMASK BIT(5)
+#define REG07_AMPTST(val) ((val) << 6)
+
+#define REG08_SLHRC(val) (val)
+#define REG08_CLOCK_DIV(val) ((val) << 2)
+#define REG08_PANEL(val) ((val) << 5)
+
+#define REG09_SUB_BRIGHT_R(val) (val)
+#define REG09_NW_NB BIT(6)
+#define REG09_IPCON BIT(7)
+
+#define REG0A_SUB_BRIGHT_B(val) (val)
+#define REG0A_PAIR BIT(6)
+#define REG0A_DE_SEL BIT(7)
+
+#define REG0B_MBK_POSITION(val) (val)
+#define REG0B_HD_FREERUN BIT(4)
+#define REG0B_VD_FREERUN BIT(5)
+#define REG0B_YUV2BIN(val) ((val) << 6)
+
+#define REG0C_CONTRAST_R(val) (val)
+#define REG0C_DOUBLEREAD BIT(7)
+
+#define REG0D_CONTRAST_G(val) (val)
+#define REG0D_RGB_YUV BIT(7)
+
+#define REG0E_CONTRAST_B(val) (val)
+#define REG0E_PIXELCOLORDRIVE BIT(7)
+
+#define REG0F_ASPECT BIT(0)
+#define REG0F_OVERSCAN(val) ((val) << 1)
+#define REG0F_FRAMEWIDTH(val) ((val) << 3)
+
+#define REG10_BRIGHT(val) (val)
+
+#define REG11_SIG_GAIN(val) (val)
+#define REG11_SIGC_CNTL BIT(6)
+#define REG11_SIGC_POL BIT(7)
+
+#define REG12_COLOR(val) (val)
+#define REG12_PWCKSEL(val) ((val) << 6)
+
+#define REG13_4096LEVEL_CNTL(val) (val)
+#define REG13_SL4096(val) ((val) << 4)
+#define REG13_LIMITER_CONTROL BIT(7)
+
+#define REG14_PANEL_TEST(val) (val)
+
+#define REG15_NVM_LINK0 BIT(0)
+#define REG15_NVM_LINK1 BIT(1)
+#define REG15_NVM_LINK2 BIT(2)
+#define REG15_NVM_LINK3 BIT(3)
+#define REG15_NVM_LINK4 BIT(4)
+#define REG15_NVM_LINK5 BIT(5)
+#define REG15_NVM_LINK6 BIT(6)
+#define REG15_NVM_LINK7 BIT(7)
+
+struct y030xx067a_info {
+ const struct drm_display_mode *display_modes;
+ unsigned int num_modes;
+ u16 width_mm, height_mm;
+ u32 bus_format, bus_flags;
+};
+
+struct y030xx067a {
+ struct drm_panel panel;
+ struct spi_device *spi;
+ struct regmap *map;
+
+ const struct y030xx067a_info *panel_info;
+
+ struct regulator *supply;
+ struct gpio_desc *reset_gpio;
+};
+
+static inline struct y030xx067a *to_y030xx067a(struct drm_panel *panel)
+{
+ return container_of(panel, struct y030xx067a, panel);
+}
+
+static const struct reg_sequence y030xx067a_init_sequence[] = {
+ { 0x00, REG00_VBRT_CTRL(0x7f) },
+ { 0x01, REG01_COM_DC(0x3c) },
+ { 0x02, REG02_VESA_SEL(0x3) | REG02_DA_CONTRAST(0x1f) },
+ { 0x03, REG03_VPOSITION(0x0a) },
+ { 0x04, REG04_HPOSITION1(0xd2) },
+ { 0x05, REG05_CLIP | REG05_NVM_VREFRESH | REG05_SLBRCHARGE(0x2) },
+ { 0x06, REG06_XPSAVE | REG06_NT },
+ { 0x07, 0 },
+ { 0x08, REG08_PANEL(0x1) | REG08_CLOCK_DIV(0x2) },
+ { 0x09, REG09_SUB_BRIGHT_R(0x20) },
+ { 0x0a, REG0A_SUB_BRIGHT_B(0x20) },
+ { 0x0b, REG0B_HD_FREERUN | REG0B_VD_FREERUN },
+ { 0x0c, REG0C_CONTRAST_R(0x10) },
+ { 0x0d, REG0D_CONTRAST_G(0x10) },
+ { 0x0e, REG0E_CONTRAST_B(0x10) },
+ { 0x0f, 0 },
+ { 0x10, REG10_BRIGHT(0x7f) },
+ { 0x11, REG11_SIGC_CNTL | REG11_SIG_GAIN(0x3f) },
+ { 0x12, REG12_COLOR(0x20) | REG12_PWCKSEL(0x1) },
+ { 0x13, REG13_4096LEVEL_CNTL(0x8) },
+ { 0x14, 0 },
+ { 0x15, 0 },
+};
+
+static int y030xx067a_prepare(struct drm_panel *panel)
+{
+ struct y030xx067a *priv = to_y030xx067a(panel);
+ struct device *dev = &priv->spi->dev;
+ int err;
+
+ err = regulator_enable(priv->supply);
+ if (err) {
+ dev_err(dev, "Failed to enable power supply: %d\n", err);
+ return err;
+ }
+
+ /* Reset the chip */
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ usleep_range(1000, 20000);
+ gpiod_set_value_cansleep(priv->reset_gpio, 0);
+ usleep_range(1000, 20000);
+
+ err = regmap_multi_reg_write(priv->map, y030xx067a_init_sequence,
+ ARRAY_SIZE(y030xx067a_init_sequence));
+ if (err) {
+ dev_err(dev, "Failed to init registers: %d\n", err);
+ goto err_disable_regulator;
+ }
+
+ msleep(120);
+
+ return 0;
+
+err_disable_regulator:
+ regulator_disable(priv->supply);
+ return err;
+}
+
+static int y030xx067a_unprepare(struct drm_panel *panel)
+{
+ struct y030xx067a *priv = to_y030xx067a(panel);
+
+ gpiod_set_value_cansleep(priv->reset_gpio, 1);
+ regulator_disable(priv->supply);
+
+ return 0;
+}
+
+static int y030xx067a_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ struct y030xx067a *priv = to_y030xx067a(panel);
+ const struct y030xx067a_info *panel_info = priv->panel_info;
+ struct drm_display_mode *mode;
+ unsigned int i;
+
+ for (i = 0; i < panel_info->num_modes; i++) {
+ mode = drm_mode_duplicate(connector->dev,
+ &panel_info->display_modes[i]);
+ if (!mode)
+ return -ENOMEM;
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER;
+ if (panel_info->num_modes == 1)
+ mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+ drm_mode_probed_add(connector, mode);
+ }
+
+ connector->display_info.bpc = 8;
+ connector->display_info.width_mm = panel_info->width_mm;
+ connector->display_info.height_mm = panel_info->height_mm;
+
+ drm_display_info_set_bus_formats(&connector->display_info,
+ &panel_info->bus_format, 1);
+ connector->display_info.bus_flags = panel_info->bus_flags;
+
+ return panel_info->num_modes;
+}
+
+static const struct drm_panel_funcs y030xx067a_funcs = {
+ .prepare = y030xx067a_prepare,
+ .unprepare = y030xx067a_unprepare,
+ .get_modes = y030xx067a_get_modes,
+};
+
+static const struct regmap_config y030xx067a_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x15,
+};
+
+static int y030xx067a_probe(struct spi_device *spi)
+{
+ struct device *dev = &spi->dev;
+ struct y030xx067a *priv;
+ int err;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->spi = spi;
+ spi_set_drvdata(spi, priv);
+
+ priv->map = devm_regmap_init_spi(spi, &y030xx067a_regmap_config);
+ if (IS_ERR(priv->map)) {
+ dev_err(dev, "Unable to init regmap\n");
+ return PTR_ERR(priv->map);
+ }
+
+ priv->panel_info = of_device_get_match_data(dev);
+ if (!priv->panel_info)
+ return -EINVAL;
+
+ priv->supply = devm_regulator_get(dev, "power");
+ if (IS_ERR(priv->supply)) {
+ dev_err(dev, "Failed to get power supply\n");
+ return PTR_ERR(priv->supply);
+ }
+
+ priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(priv->reset_gpio)) {
+ dev_err(dev, "Failed to get reset GPIO\n");
+ return PTR_ERR(priv->reset_gpio);
+ }
+
+ drm_panel_init(&priv->panel, dev, &y030xx067a_funcs,
+ DRM_MODE_CONNECTOR_DPI);
+
+ err = drm_panel_of_backlight(&priv->panel);
+ if (err)
+ return err;
+
+ drm_panel_add(&priv->panel);
+
+ return 0;
+}
+
+static int y030xx067a_remove(struct spi_device *spi)
+{
+ struct y030xx067a *priv = spi_get_drvdata(spi);
+
+ drm_panel_remove(&priv->panel);
+ drm_panel_disable(&priv->panel);
+ drm_panel_unprepare(&priv->panel);
+
+ return 0;
+}
+
+static const struct drm_display_mode y030xx067a_modes[] = {
+ { /* 60 Hz */
+ .clock = 14400,
+ .hdisplay = 320,
+ .hsync_start = 320 + 10,
+ .hsync_end = 320 + 10 + 37,
+ .htotal = 320 + 10 + 37 + 33,
+ .vdisplay = 480,
+ .vsync_start = 480 + 84,
+ .vsync_end = 480 + 84 + 20,
+ .vtotal = 480 + 84 + 20 + 16,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ },
+ { /* 50 Hz */
+ .clock = 12000,
+ .hdisplay = 320,
+ .hsync_start = 320 + 10,
+ .hsync_end = 320 + 10 + 37,
+ .htotal = 320 + 10 + 37 + 33,
+ .vdisplay = 480,
+ .vsync_start = 480 + 84,
+ .vsync_end = 480 + 84 + 20,
+ .vtotal = 480 + 84 + 20 + 16,
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+ },
+};
+
+static const struct y030xx067a_info y030xx067a_info = {
+ .display_modes = y030xx067a_modes,
+ .num_modes = ARRAY_SIZE(y030xx067a_modes),
+ .width_mm = 69,
+ .height_mm = 51,
+ .bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA,
+ .bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE | DRM_BUS_FLAG_DE_LOW,
+};
+
+static const struct of_device_id y030xx067a_of_match[] = {
+ { .compatible = "abt,y030xx067a", .data = &y030xx067a_info },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, y030xx067a_of_match);
+
+static struct spi_driver y030xx067a_driver = {
+ .driver = {
+ .name = "abt-y030xx067a",
+ .of_match_table = y030xx067a_of_match,
+ },
+ .probe = y030xx067a_probe,
+ .remove = y030xx067a_remove,
+};
+module_spi_driver(y030xx067a_driver);
+
+MODULE_AUTHOR("Paul Cercueil <paul@xxxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Christophe Branchereau <cbranchereau@xxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
