On Mon, Nov 30, 2020 at 12:39 PM Paul Cercueil <paul@xxxxxxxxxxxxxxx> wrote: > > Hi Rob, > > Le lun. 30 nov. 2020 à 7:32, Rob Herring <robh+dt@xxxxxxxxxx> a écrit > : > > On Mon, Nov 2, 2020 at 3:19 AM Paul Cercueil <paul@xxxxxxxxxxxxxxx> > > wrote: > >> > >> > >> > >> Le dim. 1 nov. 2020 à 13:29, Sam Ravnborg <sam@xxxxxxxxxxxx> a > >> écrit : > >> > On Sun, Nov 01, 2020 at 09:31:48AM +0000, Paul Cercueil wrote: > >> >> The Asia Better Technology (ABT) Y030XX067A panel is a 3.0" > >> 320x480 > >> >> 24-bit IPS LCD panel. Its particularity is that it has > >> non-square > >> >> pixels > >> >> (as it is 4:3 for a resolution of 320x480), and that it > >> requires odd > >> >> lines to be sent as RGB and even lines to be sent as GRB on its > >> >> 8-bit > >> >> bus. > >> >> > >> >> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> > >> >> --- > >> >> .../display/panel/abt,y030xx067a.yaml | 54 > >> >> +++++++++++++++++++ > >> >> 1 file changed, 54 insertions(+) > >> >> create mode 100644 > >> >> > >> Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml > >> >> > >> >> diff --git > >> >> > >> a/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml > >> >> > >> b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml > >> >> new file mode 100644 > >> >> index 000000000000..6407e8bf45fa > >> >> --- /dev/null > >> >> +++ > >> >> > >> b/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml > >> >> @@ -0,0 +1,54 @@ > >> >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > >> >> +%YAML 1.2 > >> >> +--- > >> >> +$id: > >> >> http://devicetree.org/schemas/display/panel/abt,y030xx067a.yaml# > >> >> +$schema: http://devicetree.org/meta-schemas/core.yaml# > >> >> + > >> >> +title: Asia Better Technology 3.0" (320x480 pixels) 24-bit IPS > >> LCD > >> >> panel > >> >> + > >> >> +description: | > >> >> + The panel must obey the rules for a SPI slave device as > >> >> specified in > >> >> + spi/spi-controller.yaml > >> >> + > >> >> +maintainers: > >> >> + - Paul Cercueil <paul@xxxxxxxxxxxxxxx> > >> >> + > >> >> +allOf: > >> >> + - $ref: panel-common.yaml# > >> >> + > >> >> +properties: > >> >> + compatible: > >> >> + const: abt,y030xx067a > >> >> + > >> >> + backlight: true > >> >> + port: true > >> >> + power-supply: true > >> >> + reg: true > >> >> + reset-gpios: true > >> > > >> > The binding is missing: > >> > required: > >> > - compatible > >> > - reg > >> > - power-supply > >> > - reset-gpios > >> > - ... > >> > > >> > additionalProperties: false > >> > > >> > So r-b only with these added. > >> > >> Stupid mistake, sorry about that. > >> > >> I'll V2. > > > > I don't have any V2 in my inbox, but looks like it is in linux-next > > now: > > Yes, Sam told me on IRC I could fix it while applying and avoid the V2. > > > /builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.example.dt.yaml: > > panel@0: 'spi-max-frequency' does not match any of the regexes: > > 'pinctrl-[0-9]+' > > From schema: > > /builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml > > "make dt_binding_check > DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml" > doesn't complain here :( Even if you do 'touch Documentation/devicetree/bindings/display/panel/abt,y030xx067a.yaml' or do a clean build? I can't think of any kernel or dt-schema changes which would explain the difference. This is purely related to 'additionalProperties: false'. Rob _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
