Hi Laurent, On Thu, Aug 13, 2020 at 12:11 PM Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote: > > Hi Prabhakar, > > On Thu, Aug 13, 2020 at 12:08:58PM +0100, Lad, Prabhakar wrote: > > On Thu, Aug 13, 2020 at 11:59 AM Laurent Pinchart wrote: > > > On Thu, Aug 13, 2020 at 11:38:03AM +0100, Lad, Prabhakar wrote: > > >> On Thu, Aug 13, 2020 at 10:05 AM Geert Uytterhoeven wrote: > > >>> On Wed, Aug 12, 2020 at 4:02 PM Lad Prabhakar wrote: > > >>>> From: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx> > > >>>> > > >>>> Document the RZ/G2H (a.k.a. r8a774e1) SoC in the R-Car DU bindings. > > >>>> > > >>>> Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx> > > >>>> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > >>>> --- > > >>>> Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++ > > >>>> 1 file changed, 2 insertions(+) > > >>>> > > >>>> diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt > > >>>> index 51cd4d162770..67cded5ad827 100644 > > >>>> --- a/Documentation/devicetree/bindings/display/renesas,du.txt > > >>>> +++ b/Documentation/devicetree/bindings/display/renesas,du.txt > > >>>> @@ -10,6 +10,7 @@ Required Properties: > > >>>> - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU > > >>>> - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU > > >>>> - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU > > >>>> + - "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU > > >>>> - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU > > >>>> - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU > > >>>> - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU > > >>>> @@ -75,6 +76,7 @@ corresponding to each DU output. > > >>>> R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 - > > >>>> R8A774B1 (RZ/G2N) DPAD 0 HDMI 0 LVDS 0 - > > >>>> R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 - > > >>>> + R8A774E1 (RZ/G2H) DPAD 0 HDMI 0 LVDS 0 - > > >>> > > >>> As LVDS 0 is the fourth channel (DU3), should it be listed under port 3 > > >>> instead of port 2? > > >>> > > >>> I know we did it the same for R-Car M3-N and RZ/G2N. > > >>> But my main worry is adding support for R-Car H3-N later. > > > > > > Why should we do so ? The port number here isn't tied to the DU channel > > > number. It only identifies the output port. Many DUs can route DU > > > channel outputs to different output ports. > > > > > The binding document (renesas,du.txt) does state that "The following > > table lists for each supported model the port number corresponding to > > each DU output.", hence the confusion. > > It can be a bit confusing indeed. "DU output" here refers to the output > of the whoel DU, made of individual DU channels. Each DU channel is > listed as a DU device in the datasheet, and collectively they are the DU > device that Linux handles. > Thanks for the clarification, that clears up the confusion. Cheers, Prabhakar _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.freedesktop.org/mailman/listinfo/dri-devel
