Hi Geert,
Thank you for the review.
On Thu, Aug 13, 2020 at 10:05 AM Geert Uytterhoeven
<geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar, Laurent, Kieran,
>
> On Wed, Aug 12, 2020 at 4:02 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > From: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
> >
> > Document the RZ/G2H (a.k.a. r8a774e1) SoC in the R-Car DU bindings.
> >
> > Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> > Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
> > index 51cd4d162770..67cded5ad827 100644
> > --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> > +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> > @@ -10,6 +10,7 @@ Required Properties:
> > - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU
> > - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU
> > - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU
> > + - "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU
> > - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> > - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
> > - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
> > @@ -75,6 +76,7 @@ corresponding to each DU output.
> > R8A774A1 (RZ/G2M) DPAD 0 HDMI 0 LVDS 0 -
> > R8A774B1 (RZ/G2N) DPAD 0 HDMI 0 LVDS 0 -
> > R8A774C0 (RZ/G2E) DPAD 0 LVDS 0 LVDS 1 -
> > + R8A774E1 (RZ/G2H) DPAD 0 HDMI 0 LVDS 0 -
>
> As LVDS 0 is the fourth channel (DU3), should it be listed under port 3
> instead of port 2?
>
> I know we did it the same for R-Car M3-N and RZ/G2N.
> But my main worry is adding support for R-Car H3-N later.
>
I do agree too, with the below diff I tested the LVDS output on RZ/G2N
Rev2 board and things work fine. But only thing it doesn't explain is
why does LVDS work on DU2 for G2[H/N] boards :D
Geert, Laurent, Kieran If you agree with the below changes I shall
post a proper patch fixing it for RZ/G2[HN]
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index d661724fc28a..0b087d287202 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -2540,8 +2540,8 @@
remote-endpoint =
<&dw_hdmi0_in>;
};
};
- port@2 {
- reg = <2>;
+ port@3 {
+ reg = <3>;
du_out_lvds0: endpoint {
remote-endpoint = <&lvds0_in>;
};
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
index 3e67cf70f040..419d81c7763e 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -153,7 +153,7 @@ static const struct rcar_du_device_info
rcar_du_r8a774b1_info = {
},
[RCAR_DU_OUTPUT_LVDS0] = {
.possible_crtcs = BIT(0),
- .port = 2,
+ .port = 3,
},
},
.num_lvds = 1,
Cheers,
Prabhakar
> > R8A7779 (R-Car H1) DPAD 0 DPAD 1 - -
> > R8A7790 (R-Car H2) DPAD 0 LVDS 0 LVDS 1 -
> > R8A7791 (R-Car M2-W) DPAD 0 LVDS 0 - -
>
> Apart from that:
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>
> {oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel
