Re: [PATCH 1/9] dt-bindings: display: renesas, du: Document r8a774e1 bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On Thu, Aug 13, 2020 at 11:59 AM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hello,
>
> On Thu, Aug 13, 2020 at 11:38:03AM +0100, Lad, Prabhakar wrote:
> > On Thu, Aug 13, 2020 at 10:05 AM Geert Uytterhoeven wrote:
> > > On Wed, Aug 12, 2020 at 4:02 PM Lad Prabhakar wrote:
> > > > From: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
> > > >
> > > > Document the RZ/G2H (a.k.a. r8a774e1) SoC in the R-Car DU bindings.
> > > >
> > > > Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@xxxxxxxxxxxxxx>
> > > > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > > > ---
> > > >  Documentation/devicetree/bindings/display/renesas,du.txt | 2 ++
> > > >  1 file changed, 2 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
> > > > index 51cd4d162770..67cded5ad827 100644
> > > > --- a/Documentation/devicetree/bindings/display/renesas,du.txt
> > > > +++ b/Documentation/devicetree/bindings/display/renesas,du.txt
> > > > @@ -10,6 +10,7 @@ Required Properties:
> > > >      - "renesas,du-r8a774a1" for R8A774A1 (RZ/G2M) compatible DU
> > > >      - "renesas,du-r8a774b1" for R8A774B1 (RZ/G2N) compatible DU
> > > >      - "renesas,du-r8a774c0" for R8A774C0 (RZ/G2E) compatible DU
> > > > +    - "renesas,du-r8a774e1" for R8A774E1 (RZ/G2H) compatible DU
> > > >      - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU
> > > >      - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU
> > > >      - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
> > > > @@ -75,6 +76,7 @@ corresponding to each DU output.
> > > >   R8A774A1 (RZ/G2M)      DPAD 0         HDMI 0         LVDS 0         -
> > > >   R8A774B1 (RZ/G2N)      DPAD 0         HDMI 0         LVDS 0         -
> > > >   R8A774C0 (RZ/G2E)      DPAD 0         LVDS 0         LVDS 1         -
> > > > + R8A774E1 (RZ/G2H)      DPAD 0         HDMI 0         LVDS 0         -
> > >
> > > As LVDS 0 is the fourth channel (DU3), should it be listed under port 3
> > > instead of port 2?
> > >
> > > I know we did it the same for R-Car M3-N and RZ/G2N.
> > > But my main worry is adding support for R-Car H3-N later.
>
> Why should we do so ? The port number here isn't tied to the DU channel
> number. It only identifies the output port. Many DUs can route DU
> channel outputs to different output ports.
>
The binding document (renesas,du.txt) does state that "The following
table lists for each supported model the port number corresponding to
each DU output.", hence the confusion.

Cheers,
Prabhakar

> > I do agree too, with the below diff I tested the LVDS output on RZ/G2N
> > Rev2 board and things work fine. But only thing it doesn't explain is
> > why does LVDS work on DU2 for G2[H/N] boards :D
> >
> > Geert, Laurent, Kieran If you agree with the below changes I shall
> > post a proper patch fixing it for RZ/G2[HN]
> >
> > diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
> > b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
> > index d661724fc28a..0b087d287202 100644
> > --- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
> > @@ -2540,8 +2540,8 @@
> >                                                 remote-endpoint =
> > <&dw_hdmi0_in>;
> >                                         };
> >                                 };
> > -                               port@2 {
> > -                                       reg = <2>;
> > +                               port@3 {
> > +                                       reg = <3>;
> >                                         du_out_lvds0: endpoint {
> >                                                 remote-endpoint = <&lvds0_in>;
> >                                         };
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > index 3e67cf70f040..419d81c7763e 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > @@ -153,7 +153,7 @@ static const struct rcar_du_device_info
> > rcar_du_r8a774b1_info = {
> >                 },
> >                 [RCAR_DU_OUTPUT_LVDS0] = {
> >                         .possible_crtcs = BIT(0),
> > -                       .port = 2,
> > +                       .port = 3,
> >                 },
> >         },
> >         .num_lvds = 1,
> >
> > > >   R8A7779 (R-Car H1)     DPAD 0         DPAD 1         -              -
> > > >   R8A7790 (R-Car H2)     DPAD 0         LVDS 0         LVDS 1         -
> > > >   R8A7791 (R-Car M2-W)   DPAD 0         LVDS 0         -              -
> > >
> > > Apart from that:
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>
> --
> Regards,
>
> Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.freedesktop.org/mailman/listinfo/dri-devel



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux