Re: [PATCH v2] of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Second attempt at this reply.  The first reply was mangled.

On 9/8/2015 11:28 AM, David Daney wrote:
> From: David Daney <david.daney@xxxxxxxxxx>
> 
> It is perfectly legitimate for a PCI device to have an
> PCI_INTERRUPT_PIN value of zero.  This happens if the device doesn't
> use interrupts, or on PCIe devices, where only MSI/MSI-X are
> supported.
> 
> Silence the annoying "of_irq_parse_pci() failed with rc=-19" error
> messages by moving the printing code into of_irq_parse_pci(), and only
> emitting the message for cases where PCI_INTERRUPT_PIN == 0 is not the
> cause for an early exit.
> 
> Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
> ---
> Changes in v2: Move the print function in to of_irq_parse_pci() at a
> common error exit point (as suggested by Frank Rowand).
> 
> 
>  drivers/of/of_pci_irq.c | 17 ++++++++++-------
>  1 file changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
> index 1710d9d..0be8b65 100644
> --- a/drivers/of/of_pci_irq.c
> +++ b/drivers/of/of_pci_irq.c
> @@ -38,8 +38,8 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
>  	 */
>  	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
>  	if (rc != 0)
> -		return rc;
> -	/* No pin, exit */
> +		goto err;
> +	/* No pin, exit with no error message. */
>  	if (pin == 0)
>  		return -ENODEV;
>  
> @@ -53,8 +53,10 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
>  			ppnode = pci_bus_to_OF_node(pdev->bus);
>  
>  			/* No node for host bridge ? give up */
> -			if (ppnode == NULL)
> -				return -EINVAL;
> +			if (ppnode == NULL) {
> +				rc = -EINVAL;
> +				goto err;
> +			}
>  		} else {
>  			/* We found a P2P bridge, check if it has a node */
>  			ppnode = pci_device_to_OF_node(ppdev);
> @@ -87,6 +89,9 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
>  	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
>  	laddr[1] = laddr[2] = cpu_to_be32(0);

>  	return of_irq_parse_raw(laddr, out_irq);

should be:

        rc = of_irq_parse_raw(laddr, out_irq);
        if (rc)
                goto err;
        return 0;

> +err:
> +	dev_err(&pdev->dev, "of_irq_parse_pci() failed with rc=%d\n", rc);
> +	return rc;
>  }
>  EXPORT_SYMBOL_GPL(of_irq_parse_pci);
>  
> @@ -105,10 +110,8 @@ int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
>  	int ret;
>  
>  	ret = of_irq_parse_pci(dev, &oirq);
> -	if (ret) {
> -		dev_err(&dev->dev, "of_irq_parse_pci() failed with rc=%d\n", ret);
> +	if (ret)
>  		return 0; /* Proper return code 0 == NO_IRQ */
> -	}
>  
>  	return irq_create_of_mapping(&oirq);
>  }
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux