Re: [PATCH v2] of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 9/8/2015 11:28 AM, David Daney wrote:

> From: David Daney <david.daney@xxxxxxxxxx>

> 

> It is perfectly legitimate for a PCI device to have an

> PCI_INTERRUPT_PIN value of zero.  This happens if the device doesn't

> use interrupts, or on PCIe devices, where only MSI/MSI-X are

> supported.

> 

> Silence the annoying "of_irq_parse_pci() failed with rc=-19" error

> messages by moving the printing code into of_irq_parse_pci(), and only

> emitting the message for cases where PCI_INTERRUPT_PIN == 0 is not the

> cause for an early exit.

> 

> Signed-off-by: David Daney <david.daney@xxxxxxxxxx>

> ---

> Changes in v2: Move the print function in to of_irq_parse_pci() at a

> common error exit point (as suggested by Frank Rowand).

> 

> 

>  drivers/of/of_pci_irq.c | 17 ++++++++++-------

>  1 file changed, 10 insertions(+), 7 deletions(-)

> 

> diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c

> index 1710d9d..0be8b65 100644

> --- a/drivers/of/of_pci_irq.c

> +++ b/drivers/of/of_pci_irq.c

> @@ -38,8 +38,8 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq

>  	 */

>  	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);

>  	if (rc != 0)

> -		return rc;

> -	/* No pin, exit */

> +		goto err;

> +	/* No pin, exit with no error message. */

>  	if (pin == 0)

>  		return -ENODEV;

>  

> @@ -53,8 +53,10 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq

>  			ppnode = pci_bus_to_OF_node(pdev->bus);

>  

>  			/* No node for host bridge ? give up */

> -			if (ppnode == NULL)

> -				return -EINVAL;

> +			if (ppnode == NULL) {

> +				rc = -EINVAL;

> +				goto err;

> +			}

>  		} else {

>  			/* We found a P2P bridge, check if it has a node */

>  			ppnode = pci_device_to_OF_node(ppdev);

> @@ -87,6 +89,9 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq

>  	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));

>  	laddr[1] = laddr[2] = cpu_to_be32(0);


>  	return of_irq_parse_raw(laddr, out_irq);


should be:

        rc = of_irq_parse_raw(laddr, out_irq);
        if (rc)
                goto err;
        return 0;

> +err:

> +	dev_err(&pdev->dev, "of_irq_parse_pci() failed with rc=%d\n", rc);

> +	return rc;

>  }

>  EXPORT_SYMBOL_GPL(of_irq_parse_pci);

>  

> @@ -105,10 +110,8 @@ int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)

>  	int ret;

>  

>  	ret = of_irq_parse_pci(dev, &oirq);

> -	if (ret) {

> -		dev_err(&dev->dev, "of_irq_parse_pci() failed with rc=%d\n", ret);

> +	if (ret)

>  		return 0; /* Proper return code 0 == NO_IRQ */

> -	}

>  

>  	return irq_create_of_mapping(&oirq);

>  }

> 



--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux