From: David Daney <david.daney@xxxxxxxxxx> It is perfectly legitimate for a PCI device to have an PCI_INTERRUPT_PIN value of zero. This happens if the device doesn't use interrupts, or on PCIe devices, where only MSI/MSI-X are supported. Silence the annoying "of_irq_parse_pci() failed with rc=-19" error messages by moving the printing code into of_irq_parse_pci(), and only emitting the message for cases where PCI_INTERRUPT_PIN == 0 is not the cause for an early exit. Signed-off-by: David Daney <david.daney@xxxxxxxxxx> --- Changes in v2: Move the print function in to of_irq_parse_pci() at a common error exit point (as suggested by Frank Rowand). drivers/of/of_pci_irq.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c index 1710d9d..0be8b65 100644 --- a/drivers/of/of_pci_irq.c +++ b/drivers/of/of_pci_irq.c @@ -38,8 +38,8 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq */ rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); if (rc != 0) - return rc; - /* No pin, exit */ + goto err; + /* No pin, exit with no error message. */ if (pin == 0) return -ENODEV; @@ -53,8 +53,10 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq ppnode = pci_bus_to_OF_node(pdev->bus); /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; + if (ppnode == NULL) { + rc = -EINVAL; + goto err; + } } else { /* We found a P2P bridge, check if it has a node */ ppnode = pci_device_to_OF_node(ppdev); @@ -87,6 +89,9 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); laddr[1] = laddr[2] = cpu_to_be32(0); return of_irq_parse_raw(laddr, out_irq); +err: + dev_err(&pdev->dev, "of_irq_parse_pci() failed with rc=%d\n", rc); + return rc; } EXPORT_SYMBOL_GPL(of_irq_parse_pci); @@ -105,10 +110,8 @@ int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin) int ret; ret = of_irq_parse_pci(dev, &oirq); - if (ret) { - dev_err(&dev->dev, "of_irq_parse_pci() failed with rc=%d\n", ret); + if (ret) return 0; /* Proper return code 0 == NO_IRQ */ - } return irq_create_of_mapping(&oirq); } -- 1.7.11.7 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html