[AMD Official Use Only - AMD Internal Distribution Only] > -----Original Message----- > From: Andrew Lunn <andrew@xxxxxxx> > Sent: Wednesday, March 12, 2025 8:29 PM > To: Gupta, Suraj <Suraj.Gupta2@xxxxxxx> > Cc: Russell King <linux@xxxxxxxxxxxxxxx>; Pandey, Radhey Shyam > <radhey.shyam.pandey@xxxxxxx>; andrew+netdev@xxxxxxx; > davem@xxxxxxxxxxxxx; edumazet@xxxxxxxxxx; kuba@xxxxxxxxxx; > pabeni@xxxxxxxxxx; robh@xxxxxxxxxx; krzk+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; > Simek, Michal <michal.simek@xxxxxxx>; netdev@xxxxxxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-arm- > kernel@xxxxxxxxxxxxxxxxxxx; git (AMD-Xilinx) <git@xxxxxxx>; Katakam, Harini > <harini.katakam@xxxxxxx> > Subject: Re: [PATCH net-next V2 2/2] net: axienet: Add support for 2500base-X only > configuration. > > Caution: This message originated from an External Source. Use proper caution > when opening attachments, clicking links, or responding. > > > > > On Wed, Mar 12, 2025 at 02:25:27PM +0100, Andrew Lunn wrote: > > > > > + /* AXI 1G/2.5G ethernet IP has following synthesis options: > > > > > + * 1) SGMII/1000base-X only. > > > > > + * 2) 2500base-X only. > > > > > + * 3) Dynamically switching between (1) and (2), and is not > > > > > + * implemented in driver. > > > > > + */ > > > - Keeping previous discussion short, identification of (3) depends on > > how user implements switching logic in FPGA (external GT or RTL > > logic). AXI 1G/2.5G IP provides only static speed selections and there > > is no standard register to communicate that to software. > > So if anybody has synthesised it as 3) this change will break their system? > > Andrew It will just restrict their system to (2)
