On Wed, Oct 16, 2024 at 05:00:43PM GMT, Rakesh Kota wrote: > > > On 10/16/2024 3:54 PM, Dmitry Baryshkov wrote: > > On Wed, Oct 16, 2024 at 03:35:11PM +0530, Rakesh Kota wrote: > > > The UFS driver expects to be able to set load (and by extension, mode) > > > on its supply regulators. Add the necessary properties to make that > > > possible. > > > > > > Signed-off-by: Rakesh Kota <quic_kotarake@xxxxxxxxxxx> > > > --- > > > Changes V3: > > > - Somehow after fixing the compilation in last patch, i have missed to > > > do git --amend the change. apology for that, in this change i have > > > fixed that compilation issue. > > > > What actually was changed? The --amend doesn't describe changes. Nor > > does "fixed that compilation issue". > > > Added missing semicolon (;) after regulator-allow-set-load prop for ldo9 > regulator. > > > - Link V2 : https://lore.kernel.org/all/20241015132049.2037500-1-quic_kotarake@xxxxxxxxxxx/ > > > > Where are changes between v1 and v2? > > > i will add changes history in V4 patch. It's perfectly fine (preferred even) to just answer with the requested information here, and then if you need to make changes to the patch and do send v4 you make sure to include it there. > > Where is the tag that was given to you for the v2? > > > sorry, i missed adding the Reviewed-by tag and i will add it in V4 patch. Same here, if you just reply with Dmitry's reviewd-by and a comment that you missed it, it will help me know that the patch has been reviewed and the tools will pick it up. Regards, Bjorn > > > --- > > > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 8 ++++++++ > > > 1 file changed, 8 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > > index 5f3d4807ac43..bfb1cdc238cc 100644 > > > --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > > > @@ -258,6 +258,8 @@ vreg_l6b_1p2: ldo6 { > > > regulator-name = "vreg_l6b_1p2"; > > > regulator-min-microvolt = <1140000>; > > > regulator-max-microvolt = <1260000>; > > > + regulator-allow-set-load; > > > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; > > > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > }; > > > @@ -265,6 +267,8 @@ vreg_l7b_2p952: ldo7 { > > > regulator-name = "vreg_l7b_2p952"; > > > regulator-min-microvolt = <2400000>; > > > regulator-max-microvolt = <3544000>; > > > + regulator-allow-set-load; > > > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; > > > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > }; > > > @@ -279,6 +283,8 @@ vreg_l9b_1p2: ldo9 { > > > regulator-name = "vreg_l9b_1p2"; > > > regulator-min-microvolt = <1200000>; > > > regulator-max-microvolt = <1304000>; > > > + regulator-allow-set-load; > > > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; > > > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > }; > > > @@ -467,6 +473,8 @@ vreg_l10c_0p88: ldo10 { > > > regulator-name = "vreg_l10c_0p88"; > > > regulator-min-microvolt = <720000>; > > > regulator-max-microvolt = <1050000>; > > > + regulator-allow-set-load; > > > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; > > > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > > }; > > > -- > > > 2.34.1 > > > > >
