On Wed, Oct 16, 2024 at 03:35:11PM +0530, Rakesh Kota wrote: > The UFS driver expects to be able to set load (and by extension, mode) > on its supply regulators. Add the necessary properties to make that > possible. > > Signed-off-by: Rakesh Kota <quic_kotarake@xxxxxxxxxxx> > --- > Changes V3: > - Somehow after fixing the compilation in last patch, i have missed to > do git --amend the change. apology for that, in this change i have > fixed that compilation issue. What actually was changed? The --amend doesn't describe changes. Nor does "fixed that compilation issue". > - Link V2 : https://lore.kernel.org/all/20241015132049.2037500-1-quic_kotarake@xxxxxxxxxxx/ Where are changes between v1 and v2? Where is the tag that was given to you for the v2? > --- > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > index 5f3d4807ac43..bfb1cdc238cc 100644 > --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > @@ -258,6 +258,8 @@ vreg_l6b_1p2: ldo6 { > regulator-name = "vreg_l6b_1p2"; > regulator-min-microvolt = <1140000>; > regulator-max-microvolt = <1260000>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > }; > > @@ -265,6 +267,8 @@ vreg_l7b_2p952: ldo7 { > regulator-name = "vreg_l7b_2p952"; > regulator-min-microvolt = <2400000>; > regulator-max-microvolt = <3544000>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > }; > > @@ -279,6 +283,8 @@ vreg_l9b_1p2: ldo9 { > regulator-name = "vreg_l9b_1p2"; > regulator-min-microvolt = <1200000>; > regulator-max-microvolt = <1304000>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > }; > > @@ -467,6 +473,8 @@ vreg_l10c_0p88: ldo10 { > regulator-name = "vreg_l10c_0p88"; > regulator-min-microvolt = <720000>; > regulator-max-microvolt = <1050000>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > }; > > -- > 2.34.1 > -- With best wishes Dmitry
