On 10/16/2024 3:54 PM, Dmitry Baryshkov wrote:
On Wed, Oct 16, 2024 at 03:35:11PM +0530, Rakesh Kota wrote:
The UFS driver expects to be able to set load (and by extension, mode)
on its supply regulators. Add the necessary properties to make that
possible.
Signed-off-by: Rakesh Kota <quic_kotarake@xxxxxxxxxxx>
---
Changes V3:
- Somehow after fixing the compilation in last patch, i have missed to
do git --amend the change. apology for that, in this change i have
fixed that compilation issue.
What actually was changed? The --amend doesn't describe changes. Nor
does "fixed that compilation issue".
Added missing semicolon (;) after regulator-allow-set-load prop for ldo9
regulator.
- Link V2 : https://lore.kernel.org/all/20241015132049.2037500-1-quic_kotarake@xxxxxxxxxxx/
Where are changes between v1 and v2?
i will add changes history in V4 patch.
Where is the tag that was given to you for the v2?
sorry, i missed adding the Reviewed-by tag and i will add it in V4 patch.
---
arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index 5f3d4807ac43..bfb1cdc238cc 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -258,6 +258,8 @@ vreg_l6b_1p2: ldo6 {
regulator-name = "vreg_l6b_1p2";
regulator-min-microvolt = <1140000>;
regulator-max-microvolt = <1260000>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -265,6 +267,8 @@ vreg_l7b_2p952: ldo7 {
regulator-name = "vreg_l7b_2p952";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <3544000>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -279,6 +283,8 @@ vreg_l9b_1p2: ldo9 {
regulator-name = "vreg_l9b_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1304000>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
@@ -467,6 +473,8 @@ vreg_l10c_0p88: ldo10 {
regulator-name = "vreg_l10c_0p88";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1050000>;
+ regulator-allow-set-load;
+ regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM RPMH_REGULATOR_MODE_HPM>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
--
2.34.1
