On Tue, Oct 15, 2024 at 07:01:56PM GMT, Maya Matuszczyk wrote:
> This makes the name consistent with both other x1e80100 devices and the
> dictionary. A UCM fix was merged already.
>
Please, as you update the commit message, make sure that the subject
prefix matches other changes in the particular file.
Regards,
Bjorn
> Signed-off-by: Maya Matuszczyk <maccraft123mc@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> index 10b28d870f08..004353220dc5 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
> @@ -177,9 +177,9 @@ sound {
> compatible = "qcom,x1e80100-sndcard";
> model = "X1E80100-CRD";
> audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
> - "TwitterLeft IN", "WSA WSA_SPK2 OUT",
> + "TweeterLeft IN", "WSA WSA_SPK2 OUT",
> "WooferRight IN", "WSA2 WSA_SPK2 OUT",
> - "TwitterRight IN", "WSA2 WSA_SPK2 OUT",
> + "TweeterRight IN", "WSA2 WSA_SPK2 OUT",
> "IN1_HPHL", "HPHL_OUT",
> "IN2_HPHR", "HPHR_OUT",
> "AMIC2", "MIC BIAS2",
> @@ -933,7 +933,7 @@ left_tweeter: speaker@0,1 {
> reg = <0 1>;
> reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
> #sound-dai-cells = <0>;
> - sound-name-prefix = "TwitterLeft";
> + sound-name-prefix = "TweeterLeft";
> vdd-1p8-supply = <&vreg_l15b_1p8>;
> vdd-io-supply = <&vreg_l12b_1p2>;
> qcom,port-mapping = <4 5 6 7 11 13>;
> @@ -986,7 +986,7 @@ right_tweeter: speaker@0,1 {
> reg = <0 1>;
> reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
> #sound-dai-cells = <0>;
> - sound-name-prefix = "TwitterRight";
> + sound-name-prefix = "TweeterRight";
> vdd-1p8-supply = <&vreg_l15b_1p8>;
> vdd-io-supply = <&vreg_l12b_1p2>;
> qcom,port-mapping = <4 5 6 7 11 13>;
> --
> 2.45.2
>
