This makes the name consistent with both other x1e80100 devices and the
dictionary. A UCM fix was merged already.
Signed-off-by: Maya Matuszczyk <maccraft123mc@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 10b28d870f08..004353220dc5 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -177,9 +177,9 @@ sound {
compatible = "qcom,x1e80100-sndcard";
model = "X1E80100-CRD";
audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
- "TwitterLeft IN", "WSA WSA_SPK2 OUT",
+ "TweeterLeft IN", "WSA WSA_SPK2 OUT",
"WooferRight IN", "WSA2 WSA_SPK2 OUT",
- "TwitterRight IN", "WSA2 WSA_SPK2 OUT",
+ "TweeterRight IN", "WSA2 WSA_SPK2 OUT",
"IN1_HPHL", "HPHL_OUT",
"IN2_HPHR", "HPHR_OUT",
"AMIC2", "MIC BIAS2",
@@ -933,7 +933,7 @@ left_tweeter: speaker@0,1 {
reg = <0 1>;
reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
- sound-name-prefix = "TwitterLeft";
+ sound-name-prefix = "TweeterLeft";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
qcom,port-mapping = <4 5 6 7 11 13>;
@@ -986,7 +986,7 @@ right_tweeter: speaker@0,1 {
reg = <0 1>;
reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
- sound-name-prefix = "TwitterRight";
+ sound-name-prefix = "TweeterRight";
vdd-1p8-supply = <&vreg_l15b_1p8>;
vdd-io-supply = <&vreg_l12b_1p2>;
qcom,port-mapping = <4 5 6 7 11 13>;
--
2.45.2
