[PATCH 0/9] Configure GbEth for RGMII on RZ/G2L family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For devices in the RZ/G2L family, we have so far relied on U-Boot correctly
configuring the Ethernet interfaces in RGMII mode with PVDD=1.8V before the
kernel is booted. Instead, the required configuration should be described in the
device tree and activated within the pinctrl driver.

Paul Barker (9):
  pinctrl: renesas: rzg2l: Fix variable names in OEN functions
  pinctrl: renesas: rzg2l: Refactor pin to OEN bit translation
  pinctrl: renesas: rzg2l: Support output enable on RZ/G2L
  arm64: dts: renesas: rzg2l: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2lc: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2ul: Enable Ethernet TXC output
  arm64: dts: renesas: rzg2l: Set Ethernet PVDD to 1.8V
  arm64: dts: renesas: rzg2lc: Set Ethernet PVDD to 1.8V
  arm64: dts: renesas: rzg2ul: Set Ethernet PVDD to 1.8V

 .../boot/dts/renesas/rzg2l-smarc-som.dtsi     | 86 ++++++++++++-------
 .../boot/dts/renesas/rzg2lc-smarc-som.dtsi    | 43 ++++++----
 .../boot/dts/renesas/rzg2ul-smarc-som.dtsi    | 86 ++++++++++++-------
 drivers/pinctrl/renesas/pinctrl-rzg2l.c       | 78 ++++++++++-------
 4 files changed, 182 insertions(+), 111 deletions(-)

-- 
2.39.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux