Add i.MX8QM and i.MX8QXP HSIO SerDes PHY binding. Introduce one HSIO configuration 'fsl,hsio-cfg', which need be set at initialization according to board design. Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> --- .../bindings/phy/fsl,imx8qm-hsio.yaml | 146 ++++++++++++++++++ 1 file changed, 146 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml new file mode 100644 index 000000000000..3e2824d1616c --- /dev/null +++ b/Documentation/devicetree/bindings/phy/fsl,imx8qm-hsio.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/fsl,imx8qm-hsio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8QM SoC series HSIO SERDES PHY + +maintainers: + - Richard Zhu <hongxing.zhu@xxxxxxx> + +properties: + compatible: + enum: + - fsl,imx8qm-hsio + - fsl,imx8qxp-hsio + reg: + minItems: 4 + maxItems: 4 + + "#phy-cells": + const: 3 + description: + The first defines the type of the PHY refer to the include phy.h. + The second defines controller index. + The third defines the lane mask of the lane ID, indicated which + lane is used by the PHY. They are defined as HSIO_LAN* in + dt-bindings/phy/phy-imx8-pcie.h + + reg-names: + items: + - const: reg + - const: phy + - const: ctrl + - const: misc + + clocks: + minItems: 5 + maxItems: 14 + + clock-names: + minItems: 5 + maxItems: 14 + + fsl,hsio-cfg: + description: Refer macro HSIO_CFG* include/dt-bindings/phy/phy-imx8-pcie.h. + $ref: /schemas/types.yaml#/definitions/uint32 + + fsl,refclk-pad-mode: + description: + Specifies the mode of the refclk pad used. It can be UNUSED(PHY + refclock is derived from SoC internal source), INPUT(PHY refclock + is provided externally via the refclk pad) or OUTPUT(PHY refclock + is derived from SoC internal source and provided on the refclk pad). + Refer include/dt-bindings/phy/phy-imx8-pcie.h for the constants + to be used. + $ref: /schemas/types.yaml#/definitions/uint32 + default: IMX8_PCIE_REFCLK_PAD_OUTPUT + + power-domains: + minItems: 1 + maxItems: 2 + +required: + - compatible + - reg + - reg-names + - "#phy-cells" + - clocks + - clock-names + - fsl,hsio-cfg + +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qxp-hsio + then: + properties: + clock-names: + items: + - const: pclk0 + - const: apb_pclk0 + - const: phy0_crr + - const: ctl0_crr + - const: misc_crr + power-domains: + minItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx8qm-hsio + then: + properties: + clock-names: + items: + - const: pclk0 + - const: pclk1 + - const: apb_pclk0 + - const: apb_pclk1 + - const: pclk2 + - const: epcs_tx + - const: epcs_rx + - const: apb_pclk2 + - const: phy0_crr + - const: phy1_crr + - const: ctl0_crr + - const: ctl1_crr + - const: ctl2_crr + - const: misc_crr + power-domains: + minItems: 2 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-clock.h> + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + #include <dt-bindings/phy/phy-imx8-pcie.h> + + phy@5f1a0000 { + compatible = "fsl,imx8qxp-hsio"; + reg = <0x5f1a0000 0x10000>, + <0x5f120000 0x10000>, + <0x5f140000 0x10000>, + <0x5f160000 0x10000>; + reg-names = "reg", "phy", "ctrl", "misc"; + clocks = <&phyx1_lpcg IMX_LPCG_CLK_0>, + <&phyx1_lpcg IMX_LPCG_CLK_4>, + <&phyx1_crr1_lpcg IMX_LPCG_CLK_4>, + <&pcieb_crr3_lpcg IMX_LPCG_CLK_4>, + <&misc_crr5_lpcg IMX_LPCG_CLK_4>; + clock-names = "pclk0", "apb_pclk0", "phy0_crr", "ctl0_crr", "misc_crr"; + power-domains = <&pd IMX_SC_R_SERDES_1>; + #phy-cells = <3>; + fsl,hsio-cfg = <IMX8Q_HSIO_CFG_PCIEB>; + fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>; + }; +... -- 2.37.1
